Thx George,
I rebuilt the carb already, but I might of missed something. I cleaned
everything in lacquer thinner and soaked the parts and main body for a few
hours. Then I blew everything out with compressed air and then carb cleaner
to make sure everything was clear. I guess I could have a partial blockage in
the primary fuel circuit. I did NOT however unscrew the 2 primary metering
jets because I was able to spray carb cleaner through them. One thing I
didn't replace was the check ball for the accelerator pump because the kit had
only a ball and mine had a plastic cage with the ball in it.
|
Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of
their respective authors.
This site contains affiliate links for which we may be
compensated.