IML: Master cylinder gasket 67 Imperial

["Chris Strohmeyer" <chrisstroh@xxxxxxxxxxx>]

Anyone have a lead on a Master cylinder gasket for my 67 Imperial with front 
disks? Mine has a small tear in it and can't seem to find it at auto stores.

Thx,
Chris
----- Original Message ----- 
From: <mopar413@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, December 08, 2006 9:05 AM
Subject: IML: Hub removal


> Spay a little WD or simaral stuff on the shaft and apply pressure with 
> your puller.  Then wack the end of the puller fairly hard a couple of 
> times.  Heat will help also but try first without the heat.
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm