IML: Problem with 1960 wiper motor (variable speed)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Problem with 1960 wiper motor (variable speed)



Hi Imperialists,

I would like to ask your opinion with regard to my wiper motor/switch
assembly.
It suddenly stopped working and I have had problems before when switching
off the wipers. Instead of stopping the wiperblades, they weren't parked
into park position but continue to wipe :)

After switching on and off a couple of times they returned into park
position. Yesterday I was surprised by some light rain (I normally don't
drive my 60 in the rain!) and when I switched on the wipers nothing
happened...

>From the FSM I learned that there is a replacable circuit breaker at the B
terminal of the switch ???? (when you have variable wiper speed, which was
standard in the Crown and Le Baron I believe).
However I doubt if this circuit breaker is at fault cause the trouble
started with a wiper motor that won't stop after it was switched off...

No I ended up with a wiper system that doesn't work at all :(

Any thoughts? (Dick or Paul maybe??)

Thanks a lot in advance,

Robert
1960 Crown 4 door HT



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.