Does anyone have a source for the clips that hold the rocker
covers and the other side trim?
Thanks.
From:
mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On
Behalf Of randalpark@xxxxxxx
Sent: Monday, September 11, 2006
7:28 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: '56 Parts Car
Disassembly
I have had all of this apart on my Southampton at one time or another,
but just too long ago to remember. You have done the correct thing to ask!
I believe that the stainless steel rocker mouldings are held on the
same way in 1955. I took those off without incident or damage in 1997, and my
memory is that you push against the bottom to release it from under the rocker
panel first, then push upwards towards the top to remove it from that area. If
done correctly, the clips will not be damaged. Some of them might break being
brittle from rust, but you should have no trouble preserving the stainless trim
parts.
The "pork chops" are very rare, so if they are good,
particularly on the right side, you have struck gold!
-----Original Message-----
From: jcantor791@xxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Mon, 11 Sep 2006 2:13 PM
Subject: IML: '56 Parts Car Disassembly
I
spent the better part of Labor Day weekend working on the disassembly of the
parts car I purchased on eBay recently (SN 568314 for those who are keeping
track of such things). The engine and transmission had already been removed. I
was able to get the front grill, bumper, and complete dashboard out along with
the tail lights and a few pieces of exterior trim around the windows. There
were a few things that I started working on but could not remove so I'm looking
for help/suggestions on how to proceed without breaking anything. Here are the
trouble spots:
1. Windshield washer pump - I've loosened the nuts that hold it to the firewall
and removed the wire snap ring that appears to hold the half-dollar sized
button onto the stem but I still can't remove the button to get the whole
assembly out. Since my car is missing the button, I'd really like to get this
out without damage.
2. Steering wheel - Two problems here - first I didn't bring a large enough
socket for the nut at the end of the column (I'm guessing it is 1") which
is easy enough to solve. Second, and the bigger problem, is that the steering
wheel puller I have doesn't have bolts that will thread into the holes in the
wheel. Does anyone know what the correct thread size and length is?
3. Belt line trim - I've been able to remove a fair number of the nuts holding
the belt line trim onto both the front fenders and the rear quarter panels but
I can't get at what appear to be additional nuts closer to the center of the
car (in front, the rear foot or so of the fender - in back, the two feet under
the rear window). Are these ends indeed held on with nuts or is there a
different fastener used hear? How do I go about this without breaking or
bending the trim?
4. Exterior window trim - I've been able to remove the sun visor and side trim
in front and the top, side, and bottom overtrim in the rear but the bottom trim
front and back is crimped around the window gasket. The FSM shows the use of
some special tools but they don't show a picture of the tools so I don't even
know where to begin. Anyone out there an auto-glass expert? I'm guessing these
aren't Chrysler/Imperial specific tools, just general glazer's tools.
5. Rocker panel trim - I haven't even started on this yet but recall from other
cars that this trim is usually held on with clips that require gently prying
the trim either from the bottom or the top. Is this true of Imperials in 56 as
well?
Thanks!!
Jeff
56 Sedan (and 56 Sedan parts car)
Trenton, NJ
----------------- http://www.imperialclub.com
-----------------
This message was sent to you by the Imperial Mailing List. Pleasereply to mailing-list@xxxxxxxxxxxxxxxx
and your response will beshared with everyone. Private messages (and
attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
size=2
width="100%" align=center>
Check out the new AOL.
Most comprehensive set of free safety and security tools, free access to
millions of high-quality videos from across the web, free AOL Mail and more.