--- Luis Villar <vintagetrans@xxxxxxx> wrote: > I have a 1956 with a torque-flite...my question is, > does the 727 > transmission, after the push-button was discontinued > in 1965 or 66, has the > same pattern to be installed to the 1956, 354 Hemi? > Help will be > appreciated. > Luis Villar 56-61 TF's had a cast-iron body. 56-62 TF's had the park brake at the rear. 62- TF's had aluminum bodies Push-button/cable operation ended in 1965. The 1962 is the only year that has both the later aluminum body and the park brake assembly. I don't know about bolt-pattern and if it changed when they went from the hemi to the 413 in 1959. I'd start looking at a 62 trans as a possible unit. Kenyon Wills ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm