IML: Changing the Left to Right
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Changing the Left to Right



Wouldn't this lead to a safety concern? I am thinking that if they should have all gone the same way, then the company wouldn't have gone through the trouble to build it this way in the first place. Since they are clearly identified, why is this a problem? Also, to me, fixing one stud would be more economical than replacing all ten.
 
Paul W. 
 
 
-----Original Message-----
From: SALVAGE04@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Sun, 10 Sep 2006 6:26 PM
Subject: Re: IML: left-hand lug stud crossthreaded

CHARLES, I HAVE FOUND THAT THE BEST THING TO DO IS CONVERT THE LEFT THREADS TO RIGHT HAND ONES. GO BUY 10  RIGHT STUDS,(FRONT AND BACK MAY BE DIFFERENT).  KNOCK OUT THE LEFT ONES AND PUT IN THE RIGHT HAND THREAD ONES. DO THIS ON BOTH THE LEFT WHEELS AND YOU WILL HAVE THE SAME LUG NUTS ALL THE WAY AROUND..
 
THANKS SMITTY

Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.