Re: IML: All Framed 15" wheel bolt pattern's
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: All Framed 15" wheel bolt pattern's



Another note. If the bolt pattern is the same as a 1/2 ton Ford Pick-up, then Jeep and International will have the same pattern.

David C. Wilker Jr.
United States Air Force, Retired


----- Original Message ----- From: <FltSgt@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, August 29, 2006 5:13 PM
Subject: Re: IML: All Framed 15" wheel bolt pattern's


Un-signed

The eaziest way to say it is: The wheel bolt pattern on a 1965 Imperial is
the same as a early 70's Ford or Dodge truck that has the 4x4 set up.  All
other MoPar's do not fit for they are to small.

Your studs are 9/16 while the others are 1/2 inch.  Your left side is Left
and the right side is Right threaded.

                      Uncle Rodger & Aunt Gabby
                                     Colo Spgs


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.