Æyn,When I took out the interior of my car, I found 4 broadcast sheets! Two in the rear seat and two in the passenger seat. One of them was from another Imperial, with VIN code 39 numbers before mine...?
Frank, 72 coupe (sure brake)----- Original Message ----- From: "aeyn" <mr85000@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Sunday, August 27, 2006 5:42 AM Subject: Re: IML: Car Production Broadcast Sheets
Bill, Thank You very much for that info. I have heard of people finding the sheets in the headliner and under the carpet, also. I had a 69, but I now have a 1975 4-dr HT LeBaron in Moondust Metallic. Æyn --- Bill Watson <wwatson5@xxxxxxxxx> wrote:Car production broadcast sheets date back to the early 1960's (at least) in the U.S. and 1966 or 1967 in Canada. They were used to identify the parts going onto a car and thus were attached to items brought in from other suppliers (seats, carpets, etc.) or from another line in the plant (instruemt panels). Sheets wwe also attached to the body itself as the car rolled down the line, usually to the front and rear fenders, so the assembly line workers could tell which axle, suspension, brake, wheels, etc. to install. The U.S. 1961 Plymouth-Valiant brochure shows a freshly -painted red Valiant proceeding from the paint area to the next point on the assmbly line with a brodcast sheet in the right headlamp cavity. The sheets were also printed at differennt days and times, depending upon when they were needed. Seats, which were built by outisde supppliers, had sheets printed probably the earliest while sheets placed on the fenders were done last as they would not be needed until the day of assembly. The sheets attached to the seats are usually tbe most common as they were placed in the seat springs and are the hardest to fall off. Of course sheets placed on the outside of the car as the it progressed down the line were tossed in the garbage when done. Chrysler began including the day and time of printing on the sheet sometime in the mid-1970's. The area labelled "Build Codes" listed either the last three digits of the part number or a bin number along with the colour code (where needed). This made it easy for the assembly line worker to grab the correct part for the car - torsion bars, steering column and wheel, brake/clutch pedals, radiator, wheels, wheel covers/hub caps, etc.. What years of Imperials do you have? There are a number of sites but their codes are usually a mish mosh of years as they group 1962-68 codes together which is incorrect. The codes were the same for 1960-61, 1962-64, 1965, and 1966-68. Code 502, for example, was "Deluxe wheel covers" in 1960-61, "225-cid slant six engine" in 1962-64, "Partial horn ring" in 1965 and "Floor mats - heany duty - Police" in 1966-68. >From 1969 to 1983 Chrysler used an A-N-N layout instead of the three numbers (N-N-N) and grouped codes by the first letter (A - Accesories/Packages; B- Brakes, C - Seats and carpets, D - Transmissions, etc.) Code descriptions were not altered during that time, although not all codes were used for every year. The codes were changed to an A-A-A- layout in 1984. Bill Vancouver, BC----- Original Message ----- From: "aeyn" <mr85000@xxxxxxxxx>To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Saturday, August 26, 2006 4:56 AM Subject: IML: Car Production Broadcast Sheets > Hello All, > This is just an idea. For those of us who have done work on > our cars, how many have been able to find the Car Production > Broascast sheet for our cars? And where did they find it? I > have baan able to find the Car Production Broadcast sheets in > both of my Imperials. I believe that both of them were retained > by the bottom seat springs under the back seat. Is there a > listing anywhere that will tell me what the codes meant for the > years I have? Also, on which years were the sheets done and was > there anything on the older cars like this. I know that they have > been used from 1969 to 1993. For the most part, they were hidden > and unless you know where and what to look for, most people would > not know that it even exists. > > Æyn & Patrick > > (By the way, "Æyn" is the old english spelling of "Ian" and > prodnounced the same.) > ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm