Re: IML: IML DIGEST 1963 conv in boxes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: IML DIGEST 1963 conv in boxes



Does anyone remember where /who exactly had the correct header rail sealing rubber ? I have a 63 convertible Imperial


From: John Corey <jcorey@xxxxxxxxxxx>
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: IML DIGEST 1963 conv in boxes
Date: Mon, 21 Aug 2006 11:57:11 -0400

Funny you should ask! I just finished a 61 softtop. Andy Bernbaum had almost all we needed that was Imperial-specific. Other bits are available from many convertible top shops.

On Aug 21, 2006, at 12:03 AM, LEBARON63@xxxxxxx wrote:

 Hi list
I am also putting together a 1963 Imperial Crown convertible and my shop has a new top to put on, but they would like to replace the hard rubber weather stripping that is on the side rails. Also the header strip about the windshield. Has anyone been able to locate these parts from any supplier, or does anyone know if this top assembly crosses to any other makes of cars like Cadillac or Packard or Lincoln?

Thank you, Bob May Pgh Pa

John Corey
jcorey@xxxxxxxxxx,jcorey@xxxxxxxxxxx
CFIC-Qdrive, 302 Tenth St., Troy, NY 12180 USA
518-272-3565
fax: -272-3582






-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.