Hello, I have been reading with interest all of the discussion about wiring. Now seems like a good time to ask for help on my wiring issue. I plan to tackle my inoperative power windows on my 73 this weekend. I have consulted the FSM and and have learned the main feed to the master switch is dead. I traced this wire (tan in color)to the safety relay and discovered it is dead on both sides of the relay. The red wire which operates the relay is hot and the ground is good both at the relay and the master switch. The FSM wiring diagram then leads me to the circuit breaker. The problem is it also states in the specifications this breaker also feed the power seats which do work. Does anyone have any suggestions or has anyone ever run into this before? Thanks! Tim & Katie 1973 Blue Sky __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm