Re: IML: reproduction wire and wiring sources
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: reproduction wire and wiring sources



Okay, so if I'm reading this right, a new harness from YNZ would be about 
$2,000? Is that about average? Another question: since YNZ made a harness 
for a '59 LeBaron, is it possible they could use that pattern for my '59 
Crown (4-door sedan)? I know I'm going to need one for my '59 as it appears 
there was a fire in the car at one time.

As intriguing as it sounds to make my own (and I love puzzles!) I don't 
think an Imperial is the place for a beginner, yes?

Thank you,
Laurie Carter
Ilwaco, WA USA
'59 Crown (mine)
'65 Crown Coupe (his)

----- Original Message ----- 
From: <dansgarage@xxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>

----<snip>----
 I will probably go the YNZ route and just bite-the-bullet for the cost. 
Besides, if there are about $300-350.00 in parts costs alone, another 
$1200-1500.00 for the labor involved is not too rediculous by todays 
standards.




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.