Re: IML: Overheating
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Overheating



You might also want to check the radiator filler neck where it
meets the main radiator body.  My 75 had a pin hole leak under
the overflow hose connection.  It took me forwver to find it.  I
took the tube off and re-soldered it.

I do hope that I messages help you to take care of this knawing
problem.

Æyn & Patrick

--- mopar413 <mopar413@xxxxxxxxxxx> wrote:

> Check the fluid level.  It sounds more like low fluid. 
> Sometimes when cars get hot the gauge will not read right and
> the engine will boil over the radiator.  Check rad cap and all
> hoses.  My 73 over heated and the gauge showed only half way. 
> But the car was boiling over.  Had a small leak.  fixed that
> and everything is fine.



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.