Hi group,
Over the last couple of days I've tried the
following things to soften the rubber of my rim blow switch:
-paint remover
-WD40
-leatherique rejuvenator
-brake cleaner
-vinegar
-turpentine
-paint thinner
None of these products had a
noticable effect; the rubber remained rock solid. My last resort was to carefully remove the rubber with my good
'ol Dremel. It took me a while but I got it out! I did make some marks inside
the groove but these will be hidden once a new switch is installed. In the meanwhile I've filled the cracks in the wheel with
epoxy putty and sanded it down ready for paint. Soon it will be looking
like new!
And one of our kind members (thnx Phil) sold me a
used switch so shortly I will be able honk my horn again!
Thanks,
Frank
'72 coupe (sure brake)
----- Original Message -----
Sent: Thursday, June 01, 2006 3:59
PM
Subject: Re: IML: steering wheel (rim
blow) resto
u can also use brake cleaner or laquer
thinner
John Corey <jcorey@xxxxxxxxxxx> wrote:
WD-40.
Spray and soak. jc
On May 31, 2006, at 7:47 AM, Frank Winnips
wrote:
> Hi group, > > I want to repair my cracked
steering wheel but I have a problem > with removing the rim blow
switch. > The rubber of the switch has turned rock solid and is almost
> impossible to remove from the groove. > Is there a product to
make the rubber soft again so I can get it > out
easily? > > Frank > '72 coupe (sure
brake) > > > > -----------------
http://www.imperialclub.com ----------------- > This message was sent
to you by the Imperial Mailing List. Please > reply to
mailing-list@xxxxxxxxxxxxxxxx and your response will be > shared with
everyone. Private messages (and attachments) for the > Administrators
should be sent to webmaster@xxxxxxxxxxxxxxxx > To UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm >
John
Corey jcorey@xxxxxxxxxx,jcorey@xxxxxxxxxxx CFIC-Qdrive, 302 Tenth St.,
Troy, NY 12180 USA 518-272-3565 fax:
-272-3582
----------------- http://www.imperialclub.com
----------------- This message was sent to you by the Imperial Mailing
List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response
will be shared with everyone. Private messages (and attachments) for
the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To
UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm
Feel free to call! Free PC-to-PC calls. Low rates on PC-to-Phone. Get
Yahoo! Messenger with Voice
|