Re: IML: steering wheel (rim blow) resto
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: steering wheel (rim blow) resto



WD-40.  Spray and soak.
jc

On May 31, 2006, at 7:47 AM, Frank Winnips wrote:

Hi group,

I want to repair my cracked steering wheel but I have a problem with removing the rim blow switch.
The rubber of the switch has turned rock solid and is almost impossible to remove from the groove.
Is there a product to make the rubber soft again so I can get it out easily?


Frank
'72 coupe (sure brake)



----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



John Corey jcorey@xxxxxxxxxx,jcorey@xxxxxxxxxxx CFIC-Qdrive, 302 Tenth St., Troy, NY 12180 USA 518-272-3565 fax: -272-3582




----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.