there is one company that supposedly makes them, but the engine compartment is so tight that using headers is very impractical - especially with the single-piece front clip that's on the 64-66 cars. The 73 that I have has even more clearance, and I abandoned the idea. I looked into them on my HP project, and you're going to be looking for a set that fit a C-body, but it's such a rare request and such a poor fit that there apparently pretty much not available. I'd suggest that you consider porting and polishing the stock manifolds instead. -Kenyon --- James carter <zatoichi1964@xxxxxxxxxxxxx> wrote: > where can i find a pair of headers for a '64 > imperial? > > james > > > > > test'; "> ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm