In a message dated 4/1/2006 10:56:57 AM Eastern Standard Time,
HardrickBG@xxxxxxxxxxxx writes:
Hi
All,
Does anyone know if a tranny from
a 440 will fit into a 413 motor? Please
advise
Imperial
BattleAx
The tranny will fit, but be careful with the converter. Some later 440's
have cast crankshafts, and therefore are externally balanced. If this is the
case the converter will have weights around where the flexplate bolts up.
I believe all 413's had steel cranks and are internally balanced, meaning
that converter has no weights. Also, at a certain point, the converter to
flexplate attaching bolt size was changed. Make sure you know what you have.
