Re: IML: fuel pump pushrods
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: fuel pump pushrods



A small amount of any sticky grease will hold the pushrod up in place after you get the cam eccentric where you want it to re-install the fuel pump. You dont need much and it will not harm anything when it mixes up with the oil in the engine.

Mikey
62 Crown Coupe



----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.