Phil Brust wrote: ====================== There's no simple resolution for the fuel economy readout...I think the factory conversion kit did address it but it would be a lot of trouble for little benefit. Phil Brust 73 & 82 Imperial ======================= The carb conversion manual is posted on the site. The fuel redaout requires a flow meter, which is still available from FloScan, about $100 last I knew, and also requires a Fuel Flow Sensor Stabilizer (see manual p 23). I don't know if they are available any more. I was able to obtain a new one about ten years ago. On my converted '83, the readout would work every so often. I think that I need to replace the flow meter. When I took mine apart, the entire electronics area was soaked with gas, even though it is (was) sealed with what looks like potting compound (epoxy). Dan Wing Marcy, NY USA imp1983@xxxxxxxx ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm