Most of us with the 67-69 cars with the Saginaw column ("Tilt-O-Scope" to the ad writers) have had to replace those switches. They are still pretty available - the run on eBay frequently; some dealers still have them in stock. They will cost around $100. It is a nasty, nasty job, but I've done it on all 5 of my cars with that column, and without the "special tool" that you are advised to use to pull the outer housing (no one has that, that I know of). It CAN be done without removing the housing; I've got the skinned knuckles to prove it. The good news is, the newer switches are much improved (look for a reddish tinge to the plastic parts) and will not fail again, at least in my experience (about 10 years worth). The part number for this switch is all you need, go to PartsVoice.com and do a search. Also, monitor eBay - if you can find one on there you might get a bargain, but be sure it is of the newer type (look at the picture to see the color of the plastic) The part number is: 2880 271 You will also have to make a simple tool to release the tangs on the 10 pin connector at the base of the steering column. With the wires liberated from the connector housing, you can pull the old switch up and out of the column, one wire at a time, without damaging them or the column. With the last one you pull, be sure to attach a pull string to the bottom end, so that you have something to lead the new switch's wires back into the black maze that you have to feed them through. When you see the bare wire fittings on the new switch, you will understand what tool it will take to release them from the old connector, which you will have to re-use. You also have an alternative: just live with the problem! Many of the members are doing that. Dick Benjamin -----Original Message----- From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of jsadowski Sent: Saturday, March 04, 2006 11:16 PM To: mailing-list@xxxxxxxxxxxxxxxx Subject: IML: Turn Signal Switch 69 The left side of my 69 turn signal switch won't lock in place or cancel now.Has anyone had any experience repairing-replacing one? I see repair kits for non tilt, but can't seem to find anything listed for the tilt wheel. Mine has the tilt-telescope steering wheel. John ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm