Re: IML: 90 IMP head lights

[Brad Hogg <luxoliner@xxxxxxx>]

You'd simply need to wire the hi beam wire to the low beam wire using a 
diode so the low beam couldn't turn on the hi beams.

----- Original Message ----- 
From: alan1416@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Saturday, November 12, 2005 9:20 PM
Subject: Re: IML: 90 IMP head lights


Im sure there is. will sit down with manuals and figer it out. was just 
hoping some one had already done it. I found a company that made a different 
relay for my Olds Bravada now it burns all 4 lamps on high, but they show 
notta for my baby.
--
Alan Jordan
90 IMP
75 LeBaron


-------------- Original message from Brad Hogg 
<luxoliner@xxxxxxx>: -------------- 


BTW, the feature where the high beam lights come on when you pull that 
signal stalk toward you is called, by Chrysler, the "Optical Horn".  I've 
seen other manufacturers call it a "Passing Signal".

Oh, and, there is always a way...

----- Original Message ----- 
From: OTTODOCFACS@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Saturday, November 12, 2005 4:07 PM
Subject: Re: IML: 90 IMP head lights


there is no way to light all 4 lamps on high, as the low beam bulbs
are sinlge filement only. they are not like the older sealed beam
bulbs that had 2 filements in the low beam.
i know if you hold the handle it will light all 4 , but not sure if the 
switch would overheat from all the draw on the electrical circuit, if all 4 
would stay on all the time in high

frank
90 imp 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm