Re: IML: Remove stainless roof panels from 60 LaBaron
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Remove stainless roof panels from 60 LaBaron



they are spot welded
On Oct 26, 2005, at 6:41 PM, Tom & Kellie Willson wrote:

I am trying to remove the stainless roof panels.
I have removed all trim around the panel except for the chrome drip molding over the doors. The stainless panel appears to have a lip hooked under the drip molding.
I can not move either the drip molding or the stainless panel.
Are they held in place with a sealant? Would heat be helpful?
What would you suggest?
Tom





----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm





----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.