RE: IML: Engine problems

["WCR" <1roscoe@xxxxxxxxxxxxx>]

Well, it may not solve the problem, but I would start by setting the points
to achieve the proper dwell angle, regardless of the gap.  Does the dwell
vary with RPMS?
Did you follow up and check the vacuum?

Bill




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm