IML: 64 Imperial Convertible

["JAY D'ANGELO" <cadij@xxxxxxxxxxx>]

I have located a set of reproduction fiberglas top boot ends for my 
convertible.  Thanks for the leads.  Any tips on what snaps I should use and 
the best way to install them without messing up the project?  I was planning 
on using velcro to attach the middle vinyl piece to the inside ends, unless 
someone has a better system.  Since I have to paint them black, I was 
thinking of using a grey auto primer and then a vinyl paint top coat.  What 
do the experts say?

In addition, my fuel tank sending unit is on the fritz.  Could be the float 
is weighed down with fluid, or the sender is shot.  Does anyone have a 
source for a sending unit?  I did find a source, but he wants $236 for it - 
I'd like to try and save a few bucks, if I can.

Thanks,

Jay




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm