Re: IML: Sorry so late
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Sorry so late



Sorry I have not gotten back but I was trying to get everything tied down for the hurricane here we go again. Thank you for info I don't have enough money to get those heads from mopar for about 1,100 dollars,  so I am just going use the original heads. I asked the machine shop about port and polish the heads, they told me for an everyday driver vehicle your not going to get that much more horse power until your pushing around 450 or higher. I am just looking to get a little more horse power because the car is so heavy. Rebuilting the top end of the engine should do that with a few more little adjustments I am looking for around 350 or so horse power.  
> 
> From: FltSgt@xxxxxxx
> Date: 2005/06/30 Thu AM 12:34:51 EDT
> To: mailing-list@xxxxxxxxxxxxxxxx
> CC: MHReddish@xxxxxxxxx
> Subject: Re: IML: thanks for info
> 
> ( _____ )
> 
> 
> You will better off if you find a set of late 63/ '64 heads for the 361/ 383/ 
> 413/ 426 wedge or first series 440 that have six bolts to hold on the leakie 
> valve covers rather than the super leakie four bolt series that you have.  
> Also the newer heads have better flow spec's than yours so the mpg and other 
> stuff is better.  The last set of heads that came on 400'sand 440's have the best 
> of the flowing and cooling.  They have a casting of 4006452 on them.  If you 
> feel the emails don't match from other Imperial people call 1-248-969-1690 and 
> ask MoPar Performace the same question.
> 
> Why purchase roller rocker's ???  If you want internal engine power have the 
> heads ported ( # P 4120437 ).  If you do this, the rollers will show their 
> stuff.  And it is an cheaper expense for the power gain.  I wll save ya or any 
> other 413/ 440 owner a ten buck bill if you port.  Just email me direct.
> 
> Your car weighs a bunch of pounds and trying to do as the 440 into the Dart 
> gangs does not make a very happy Imperial driver.  You must built and set your 
> engine up for torque.  Bottom end and mid range is your target, nuthin more.
> 
>                                        Rodger & Gabby
>                                        Colo Spgs
> 
> '47 De Soto Custom w/Fluid Drive & passenger door mounted swamp cooler
> '62 Crown Coupe w/std A/C & Auto-Pilot
> '63 Le Baron w/std Air & some other good options
> '66 Le Baron w/dual A/C & reverbed AM/FM
> '70 Overlander - InterNational Dbl
> '77 D150 w/360, NP 4 Spd, 12 Bolt Axle, OEM Buckets & etc
> 
> 
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please 
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
> 
> 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.