Re: IML: 1962 VIN plate question (factory or modified)

["jsadowski" <jsadowski@xxxxxxx>]

I believe they are supposed to be riveted on. The rivets are not available 
to the public. I recall a Mopar vendor going to jail for selling them a few 
years ago. I would suspect something fishy going on with that car.
John
----- Original Message ----- 
From: <billwhite55@xxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Monday, July 04, 2005 4:36 PM
Subject: IML: 1962 VIN plate question (factory or modified)


> I photographed a VIN plate attached to a '62 Imperial Lebaron.  The plate 
> placement was in the correct location, but it was spot welded and first 
> two numbers were over stamped (93).  Is this how the VIN plates were made 
> in '62.  The photo can be found at
>  http://www.geocities.com/imperial19551955/
>
> Bill White '55 & '59 (and someday a '62) Imperial.
>
>
>
>
> _______________________________________________
> Join Excite! - http://www.excite.com
> The most personalized portal on the Web!
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm