Re: IML: Adjusting brakes on a 53 Imperial

[Kenyon Wills <imperialist1960@xxxxxxxxx>]

MTSC's
http://imperialclub.com/Repair/Lit/Master/080/index.htm
http://imperialclub.com/Repair/Lit/Master/008/index.htm
http://imperialclub.com/Repair/Lit/Master/009/index.htm

FSM's
http://imperialclub.com/Repair/Lit/index.htm
 
The MTSC stuff is written on my level (bottom floor)
and has really neat pictures and diagrams.  I'm really
proud that we're about 50% done with all the MTSC
items - been through there overall lately?  Killer
stuff!!

http://imperialclub.com/Repair/Lit/Master/history.htm
http://imperialclub.com/Repair/Lit/Master/index.htm 


-Kenyon



--- Currell Pattie <currellpattie@xxxxxxxxxxx> wrote:

> On pre (I think) 55 Imperials, there are two 3/4"
> hex nut adjustments on 
> each wheel for minor breke adjustments. You can
> tighten or loosen, kind of 
> like the little sprocket wheel, which came later.
> 
> Do both nuts loosen with counterclockwise rotation,
> or does the rear nut 
> loosen with counterclockwise turns, and the front
> loosen with clockwise?
> 
> Thanks for any help.  Currell
> 
> 
> 
> 
> -----------------  http://www.imperialclub.com 
> -----------------
> This message was sent to you by the Imperial Mailing
> List. Please 
> reply to mailing-list@xxxxxxxxxxxxxxxx and your
> response will be 
> shared with everyone. Private messages (and
> attachments) for the
> Administrators should be sent to
> webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
> 
> 


Kenyon Wills
 
 






















-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm