Re: "hemi" vs. "wedge" -- was Re: IML: Fun Ride '67 Imperial with a Hemi
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: "hemi" vs. "wedge" -- was Re: IML: Fun Ride '67 Imperial with a Hemi?



Actually those Australian Hemi 6's were not slants or even slant based but upright engines developed and manufactured entirely in Australia.
Don
----- Original Message ----- From: "Dave" <Wilkerbeast01@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, May 27, 2005 10:53 PM
Subject: Re: "hemi" vs. "wedge" -- was Re: IML: Fun Ride '67 Imperial with a Hemi?



Yes! Those Ausie Valients with Slant Six Hemis and 4 barrel carbs scoot!

David C. Wilker Jr. USAF (RET)
Children need love, especially when they do not deserve it.
- Harold S. Hulbert
----- Original Message ----- From: "David Whitney" <david.whitney@xxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, May 27, 2005 7:30 PM
Subject: "hemi" vs. "wedge" -- was Re: IML: Fun Ride '67 Imperial with a Hemi?



If you already know this, skip to the next message. The designations
"wedge" and "hemi" do not refer to the engine per se. Those words actually
describe the shape of the combustion chamber in the cylinder heads.


That said, there never was a 383, 400, 413 or 440 hemi because the hemi
heads are only compatible with the 426 blocks that were cast specifically
to receive those heads.

The 426 was originally a wedge, then a wedge or a max wedge, then for a
time could be had as either wedge, max wedge or hemi depending on which
block/head combination the customer ordered, then the max wedge disappeared
and from 1966 on it was a 426 hemi or a 440 wedge if you wanted a big V-8.
The hemi parts are also not interchangeable with the wedge/max wedge parts
for the reason stated above.


Chrysler trivia -- in some export markets, Chrysler sold a slant six engine
with hemispherical combustion chamber heads! Can't you just picture a '64
Valiant with a "Yeah, it's got a hemi" bumper sticker?


Happy motoring,

David



"Dave"
<Wilkerbeast01@xxxxxxxxx To: <mailing-list@xxxxxxxxxxxxxxxx>
et> cc:
Sent by: Subject: Re: IML: Fun Ride '67 Imperial with a Hemi?
mailing-list-owner@imper
ialclub.com



05/27/2005 06:31 PM Please respond to mailing-list






I think the 400, 413, 440 and 383 engines were referred to as "wedge" design, weren't they?

David C. Wilker Jr. USAF (RET)
Children need love, especially when they do not deserve it.
                                                              - Harold S.
Hulbert
----- Original Message -----
From: <RandalPark@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, May 27, 2005 6:25 PM
Subject: Re: IML: Fun Ride '67 Imperial with a Hemi?


During that time, the available Hemi was a 426.

Paul W.

In an email dated 27/5/2005 6:09:14 pm GMT Daylight time, AGDJ@xxxxxxx
writes:

Well, my mechanic swears it is a hemi....440 is what it says on it.....
but
I am a novice at this, it may be that I am ignorant in this.... but a
picture
will be forth coming.



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm






----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm





----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.