Re: IML: Window motors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Window motors



If these are the same motors in the '61, I could use four. 
 
Joe
Allen, Texas
'61 Crown 4D Southampton
 
 
-----Original Message-----
From: Kenyon Wills <imperialist1960@xxxxxxxxx>
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Fri, 6 May 2005 08:44:34 -0700 (PDT)
Subject: Re: IML: Window motors

I have access to a pile of about 150 of them.  I plan
to sell them on ebay.  All came out of running cars
and have been stored indoors.  I plan to test each for
operability, but I can't test for strength and speed. 


If you want it done right, going out and getting the
new ones that come in 89 dodge dynasties is probably
the way to go.

If you are interested, please write to me at
imperialist1960@!yahoo.com.  


-Kenyon


--- CRNIMPERIAL64@xxxxxxx wrote:
> I'll see if I can find a number of the place that
> rebuilt mine.  It  was in 
> PA somewhere.  I have a 64 Crown Imperial.  I have
> had nothing,  but window 
> problems.  In my opinion you are better off having
> the existing  ones rebuilt.  I 
> messed around with putting used ones in before and
> they  ended up being just 
> as weak as the ones replaced.  
>  
> Mark
> Crown Imperial, 1964
> 

Kenyon Wills
 
 






















-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.