IML: 63 carb PCV hose?

["bom tie" <bomtie@xxxxxxxxxx>]

I had the car apart for a long time and now the PCV hose has now where to plug into!!!
Dick gave me the answer to this question, but now I need a photo showing where this hose goes into the carb or intake. I think I must be missing the bakelite plate that was under the carburetor. Can someone send me a photo showing this part and location? THANKS

DICK,s Answer...
The PCV hose can go to any vacuum fitting on the intake manifold.  Sometimes this is on a special heat insulator that is sandwiched under the carburetor,and from the bend in this hose, that could be the case.
Can you find the 1/2 thick or so bakelite plate that was under thecarburetor?  Does it have a hose tube on it? If you can't find it, this hose can go to any other vacuum fitting on the intake - like the one that goes to the power brake unit - you'll have to kludge up fittings until you come up with something that fits.


_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm