So, can the year be determined on a 61 transmission like the engine can? ----- Original Message ----- From: <RandalPark@xxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Thursday, April 21, 2005 11:17 PM Subject: Re: IML: 61 Transmission Build Date > The year can be determined, but you can't tell if it is the actual motor that was put in the car at the factory by the number. > > Paul > > In an email dated 22/4/2005 2:50:35 am GMT Daylight time, Curt Brennan <cabrennan@xxxxxxxxxxx> writes: > > >Bill, > >Can't you tell what YEAR the motor is though, buy the numbers > >stamped on it? > >Curt > >(also on the Dodge Dart site) > > > >> From: "Bill Watson" <wwatson5@xxxxxxxxx> > >> Reply-To: mailing-list@xxxxxxxxxxxxxxxx > >> Date: Thu, 21 Apr 2005 18:45:20 -0700 > >> To: <mailing-list@xxxxxxxxxxxxxxxx> > >> Subject: Re: IML: 61 Transmission Build Date > >> > >> > >> You cannot determine if a Mopar vehicle is "numbers matching" prior to > >> mid-1968 or so. Prior to that Chrysler did not stamp the VIN on either > >> engines or transmissions, so there is not way to determine if those units > >> were installed at the factory the day the car was built. > >> > >> Of the numbers stamped onto the transmission, the transmission assembly > >> number is in the first set. Thus "19499 904" is the assembly number and it > >> is for a 1961 Torqueflite used on 1961 Imperials (as well as Dodge Polara, > >> DeSoto, all Chryslers, and HP Plymouths and Darts) . It was also used on > >> 1960 HP Plymouths and Darts. > >> > >> Bill > >> Vancouver, BC > >> > >> > >> > >> > >> ----- Original Message ----- > >> From: Rob Kidd > >> To: mailing-list@xxxxxxxxxxxxxxxx > >> Cc: Rob Kidd > >> Sent: Wednesday, April 20, 2005 5:18 AM > >> Subject: IML: 61 Transmission Build Date > >> > >> > >> Hello, I have my 61's transmission out and ready to be > >> rebuilt. How can I tell if it is the original -numbers matching one that > >> came with the car from day one? The numbers on the side of the pan lip are; > >> 1949904U2.5 1722128 > >> Can these numbers be decoded to show the build date? > >> Thanks, Rob Kidd 61/65 > >> > >> > >> > >> ----------------- http://www.imperialclub.com ----------------- > >> This message was sent to you by the Imperial Mailing List. Please > >> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be > >> shared with everyone. Private messages (and attachments) for the > >> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx > >> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm > >> > > > > > > > >----------------- http://www.imperialclub.com ----------------- > >This message was sent to you by the Imperial Mailing List. Please > >reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be > >shared with everyone. Private messages (and attachments) for the > >Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx > >To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm > > > > > > > ----------------- http://www.imperialclub.com ----------------- > This message was sent to you by the Imperial Mailing List. Please > reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be > shared with everyone. Private messages (and attachments) for the > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/05 > > ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm