Re: IML: 3 bolt timing sets.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: 3 bolt timing sets.
- From: David Whitney <david.whitney@xxxxxxxxxxxx>
- Date: Tue, 22 Feb 2005 20:20:11 -0800
Also please note, aesthetically, that the nylon gears did what they were
intended to do -- they reduced engine noise. Different gear = more noise.
You may want to consider putting nylon gear replacement on your 60,000-mile
maintenance schedule or it will almost certainly go on your unscheduled
maintenance schedule.
-- David
"mike sutton"
<mikanlin62@xxxxxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent by: cc:
mailing-list-owner@imper Subject: Re: IML: 3 bolt timing sets.
ialclub.com
02/22/2005 07:49 PM
Please respond to
mailing-list
One caveat regarding the use of the 3 bolt timing set, unless you really
want to replace the cam and lifters, you wont be able to use the 3 bolt cam
gear on the single bolt cam. You can get a double row timing set such as a
Cloyes brand, or any other for that matter, in a single bolt and it will be
plenty strong and long lasting for years to go.
Mikey
62 Crown Coupe
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network