You can get wire wheels from Coker for your Imperial. If the '67 still has the same bolt pattern at the '66 and previous. Here is the link from when this came up previously: http://www.coker.com/store/customer/product.php?productid=16377&cat=320&page =1 I would like to get a set for my '66, but will have to wait till I can afford them. I think they would look swell, and be able to better take the radial tires we all, or most of us run these days. The older original rims get little cracks in the weld, and in my experience anyway, the original rims are getting harder to find. I also want to be sure to be able to have a least some sort of security so people of "Questionable Character" don't abscond with my wire rims thinking they can slap them on their Caddy, Lincoln, Chubby, or Ford Truck for that matter! Bill Ulman Seattle, WA '66 Crown Convertible Coupe - Doris Day -----Original Message----- From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Dick Benjamin Sent: Thursday, February 03, 2005 1:15 PM To: mailing-list@xxxxxxxxxxxxxxxx Subject: RE: IML: RE;IML; 1967 Impereial wire wheels Wire wheels were not offered for these cars. If you want to put them on your car, you need to match not only the bolt circle and wheel width, but the offset and the clearance hole for the hub, and be sure they will clear the brake calipers. You must also be prepared for people like me, who will be appalled at the idea (but I'm an old fuddy duddy about originality)! Dick Benjamin -----Original Message----- From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Edward Tiede Sent: Thursday, February 03, 2005 10:13 AM To: mailing-list@xxxxxxxxxxxxxxxx; Rob_Mopar@xxxxxxxxxxx Subject: IML: RE;IML; 1967 Impereial wire wheels Hi All Need information on wire wheels for a '67 Crown convertible with the Budd disc brake system. According to the FSM the wheels size is 15 x 6JK which is a 15 inch wheel with 9/16" studs on a 5 bolt 5" stud bolt circle. Any information will be of great help. Thanks Ed Tiede/'67 convertible ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm