[GFS] UPDATE--290HP POLY CHOKE TUBE ASM REPRO
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[GFS] UPDATE--290HP POLY CHOKE TUBE ASM REPRO



Hello All

Just a quick update for those who had expressed an interest...............
I believe I can reproduce (almost perfectly) the choke heater tube housing that bolts into the dual quad poly intake manifold.  It has a new steel plate and stainless tubing

We are shooting for 6 committments which is the bare minimum that the shop AND tube house will accept to do this.
If we get 6,,the price will be $160 total each.
So far we are at 4

ED ECKERSON
LI  NY


[Non-text portions of this message have been removed]



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/goldenfin/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/goldenfin/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:goldenfin-digest@xxxxxxxxxxxxxxx 
    mailto:goldenfin-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    goldenfin-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.