The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Clock Autocalibration
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
macedon
Posted 2021-01-12 4:02 PM (#607661)
Subject: Clock Autocalibration



Elite Veteran

Posts: 963
5001001001001002525
Location: San Antonio, TX
Does anybody know if the 57 De Soto clocks have autocalibration. I read that's it's supposed to adjust the speed of the clock based on how you reset it. So if like me you are losing time and keep having to adjust it forward eventually the clock will speed up and autocalibrate itself. I had my sedan off battery for several months and when I hooked it back up I noticed after a few days the clock was running slow. I'm losing about 3 minutes a day. Maybe I need to adjust it forward every day for a while to speed up the autocalibration process.
Top of the page Bottom of the page
wizard
Posted 2021-01-12 4:49 PM (#607662 - in reply to #607661)
Subject: Re: Clock Autocalibration



Board Moderator & Exner Expert 10K+

Posts: 13042
500050002000100025
Location: Southern Sweden - Sturkö island
Pull out the knob fully and turn one full clockwise revolution for one minute +
The knob should have two positions, the first for to set the Clock and the second for to adjusting the accuracy.
This will perhaps not work due to frozen mechanism and or work contact.
Top of the page Bottom of the page
macedon
Posted 2021-01-12 6:51 PM (#607667 - in reply to #607661)
Subject: Re: Clock Autocalibration



Elite Veteran

Posts: 963
5001001001001002525
Location: San Antonio, TX
Hmmm. I'm not sure I understand. If I pull the knob out and turn the hands move. The knob will turn when it is in as well (hands do not move)
Top of the page Bottom of the page
wizard
Posted 2021-01-13 12:53 AM (#607675 - in reply to #607661)
Subject: Re: Clock Autocalibration



Board Moderator & Exner Expert 10K+

Posts: 13042
500050002000100025
Location: Southern Sweden - Sturkö island
Pull out the knob fully and turn the hands one hour Forward. Then pull out the knob partly and set the time. You should be able to feel a spring load when You pull out the knob past the normal set position.
Top of the page Bottom of the page
macedon
Posted 2021-01-13 5:08 PM (#607695 - in reply to #607661)
Subject: Re: Clock Autocalibration



Elite Veteran

Posts: 963
5001001001001002525
Location: San Antonio, TX
Thanks. I'll try that
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)