|
|
Veteran
Posts: 122
Location: Murray Bridge, South Australia | Hi all I am after a 58 desoto radiator or at least the top and bottom tanks so i can get one made up, there is one on ebay for $250 but the site will not allow me to contact him through the site as he has listed no shipping to Australia
https://www.ebay.com/itm/VINTAGE-COPPER-1957-1958-Dodge-Desoto-radia...
Thanks Bob |
|
| |
|
Elite Veteran
Posts: 1141
 
Location: Blackpool, United Kingdom. | Hi Bob,
They are hard to find, the one on ebay is for a 58 Dodge 325ci without transmission cooler,
If you are looking for a 350ci with cooler, the part numbers are 1754452 and 1754454,
Took me 3 years to find one ??
Paul. |
|
| |
|
Veteran
Posts: 130
Location: Wyoming | I have top/bottom tanks for a 59 Dodge radiator if you are interested. I’m not near them now to check my books or get numbers off the parts, but will be in a couple of days. Let me know. If I remember correctly, the car this came from was a B block car (350, 383, etc). |
|
| |
|
Veteran
Posts: 122
Location: Murray Bridge, South Australia | Thanks to all I have arranged a set if tanks from John. |
|
| |
|
Expert
Posts: 1488
Location: Florida | Hi Bob,
I need to get this boxed up shortly and get the postage cost to you - it'll be a rainy Saturday, so hopefully tomorrow.
As we have already discussed, the rad is for an auto transmission car, so you'll have to ask your rad shop to plug/fill the holes in the lower tank for the trans cooler. I am including the cooler anyways.
And of course, you will receive the steel side brackets as well.
Edited by Chopper John 2021-03-05 10:07 AM
|
|
| |
|
Veteran
Posts: 148
| that radiator pictured on the ebay ad wont fit a B block. The bottom hose outlet and pet**** are switched. If you try to use it on a B block the oil filter hits the hose outlet. |
|
| |
58 sportsman coupe radiator
