|
|
Expert 5K+
Posts: 8947
Location: WHEELING,WV.>>>HOME OF WWVA | some where there is a thread or 2 here with info on how to stop a 2 door seat back from folding forward for
a 4 door . any body got info or the thread about the stop would be great . i just can't find it in my old age-------------------------------------------------------------later |
|
|
|
Expert 5K+
Posts: 6487
Location: Newark, Texas (Fort Worth) | There is a Utah shaped piece of metal that goes in seat bottom on the inner? side I believe, and that stops the folding feature, remove it and the seat will fold. |
|
|
|
Board Moderator & Exner Expert 10K+
Posts: 13042
Location: Southern Sweden - Sturkö island | If you still use your old email address, you'll find the drawing there! |
|
|
|
Expert 5K+
Posts: 9605
Location: So. Cal | I would prefer to have a catch like on the '68-up seat backs so that it doesn't move forward unless you release the catch. |
|
|
|
Expert
Posts: 3966
Location: DFW, TX | Each seat has a joint on each side that will need to be "jammed" with a steel insert in order to lock the seat upright for use in a four-door.
My pictures are showing me removing them for use in a coupe, but you get the idea. It shows how they need to be oriented down there. (the arrow was on it from the factory!)
You would need four of the steel inserts. I still have mine, if you're looking for some.
(1.jpg)
(2.jpg)
(3.jpg)
(4.jpg)
Attachments ---------------- 1.jpg (179KB - 167 downloads) 2.jpg (164KB - 176 downloads) 3.jpg (216KB - 159 downloads) 4.jpg (233KB - 163 downloads)
|
|
|
|
Expert 5K+
Posts: 8947
Location: WHEELING,WV.>>>HOME OF WWVA | thank you gentlemen very much . looks like they just jam against the end of the seat arm ----------------------------------------------------later |
|
|
|
Expert 5K+
Posts: 6487
Location: Newark, Texas (Fort Worth) | 2 Texans help again. |
|
|