The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Seeking Photos of a 146 tooth air-cooled PF torque converter
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Transmission and Rear AxleMessage format
 
56D500boy
Posted 2019-01-06 7:45 PM (#576373)
Subject: Seeking Photos of a 146 tooth air-cooled PF torque converter



Expert 5K+

Posts: 9896
500020002000500100100100252525
Location: Lower Mainland BC		I searched the forum and was surprised to NOT find a photo of an air-cooled PF torque converter pre-1957 with 146 teeth on the ring gear.

I am curious about the size of the air-cooling fins. I tried to see them while poking around under the car today but they are hard to see through the mesh on the air-cooled bell-housing (and not visible from the bottom plate opening).





(56Dodge315Hemi1559413Bellhousing_LeftSideView.jpg)



(56Dodge315Hemi1559413Bellhousing_BottomRearView.jpg)



Attachments
----------------
Attachments 56Dodge315Hemi1559413Bellhousing_LeftSideView.jpg (124KB - 173 downloads)
Attachments 56Dodge315Hemi1559413Bellhousing_BottomRearView.jpg (142KB - 188 downloads)
Top of the page Bottom of the page
Phil_the_frenchie
Posted 2019-01-07 4:48 PM (#576456 - in reply to #576373)
Subject: RE: Seeking Photos of a 146 tooth air-cooled PF torque converter



Elite Veteran

Posts: 915
500100100100100
Location: Pau, S-W France		From a '58 Dodge Kingsway, not sure if it is useful ...

Edited by Phil_the_frenchie 2019-01-07 4:50 PM




(018 [1024x768].JPG)



Attachments
----------------
Attachments 018 [1024x768].JPG (217KB - 172 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2019-01-07 7:16 PM (#576461 - in reply to #576373)
Subject: Re: Seeking Photos of a 146 tooth air-cooled PF torque converter



Expert 5K+

Posts: 9896
500020002000500100100100252525
Location: Lower Mainland BC		Phil: Thanks very much. That helps me figure things out.

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)