The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Parting 1960 Plymouth Belvedere 4 dr Sedan
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUTMessage format
 
CustomRoyal
Posted 2018-09-08 3:33 PM (#569819)
Subject: Parting 1960 Plymouth Belvedere 4 dr Sedan


Extreme Veteran

Posts: 322
100100100
6 cyl 53000 mi. Auto, Manual steering with round aero wheel. Red interior. Lots of nice stuff!
Top of the page Bottom of the page
udoittwo
Posted 2018-09-20 7:04 AM (#570435 - in reply to #569819)
Subject: RE: Parting 1960 Plymouth Belvedere 4 dr Sedan


Expert

Posts: 1351
10001001001002525
Location: Valley Forge, Pa.
Hello, I'm looking for the brake pedal rod for a power brake set up but will consider a non-power rod. I need from the master cyl. to the pedal.

Always have to ask, I need the plastic bezel around the gauges, spare if good, headlight bezels, dash speaker grill, decent front door sills, the stainless trim that I call "the paint dividers" that run from the rockers up over the front wheels.
arm rests, speedo cable IF its a powerflight lower front valance if it is not too mangled, the optional bar on the front bumper that protests the grill.

Thanks for any help and HAVE A GREAT DAY!
Karl.
Top of the page Bottom of the page
jboymechanic
Posted 2018-09-20 9:59 AM (#570442 - in reply to #569819)
Subject: Re: Parting 1960 Plymouth Belvedere 4 dr Sedan



Expert

Posts: 2206
2000100100
Location: Muskego, WI
Dang Karl, I was going to ask about all the exact same parts!

CustomRoyal, where is the car located? I would like to know for large part shipping consideration.
Top of the page Bottom of the page
udoittwo
Posted 2018-09-21 7:06 AM (#570498 - in reply to #570442)
Subject: Re: Parting 1960 Plymouth Belvedere 4 dr Sedan


Expert

Posts: 1351
10001001001002525
Location: Valley Forge, Pa.
Yeah, those are the parts that are usually gone. I'm hoping someone can hook me up with the pedal rod.
Top of the page Bottom of the page
CustomRoyal
Posted 2018-09-21 9:33 PM (#570545 - in reply to #570498)
Subject: Re: Parting 1960 Plymouth Belvedere 4 dr Sedan


Extreme Veteran

Posts: 322
100100100
Headlight bezels are sold, bezel around speedo is cracked and junk. Front valence is rotted badly. Rt rear door armrest decent. Pad faded, bottom nice. red color. Will look for brake rod for you.
Car is in Massachusetts
Top of the page Bottom of the page
CustomRoyal
Posted 2018-09-21 9:35 PM (#570546 - in reply to #570435)
Subject: RE: Parting 1960 Plymouth Belvedere 4 dr Sedan


Extreme Veteran

Posts: 322
100100100
No speaker grille or optional front bumper guard. Car has a torqueflite 6 tranny (904)
Top of the page Bottom of the page
udoittwo
Posted 2018-09-22 9:17 AM (#570564 - in reply to #570546)
Subject: RE: Parting 1960 Plymouth Belvedere 4 dr Sedan


Expert

Posts: 1351
10001001001002525
Location: Valley Forge, Pa.
Thanks. Look and see if it has one and then let me know what its worth to you including shipping before you do any thing else.

I THINK every MOPAR from the mid 50s-early 60s used the same brake pedal rod. Only difference was that they were either power or non.

Top of the page Bottom of the page
CustomRoyal
Posted 2018-09-24 6:16 PM (#570714 - in reply to #570564)
Subject: RE: Parting 1960 Plymouth Belvedere 4 dr Sedan


Extreme Veteran

Posts: 322
100100100
Pm sent
Top of the page Bottom of the page
Gashog
Posted 2019-03-21 10:01 AM (#579646 - in reply to #569819)
Subject: RE: Parting 1960 Plymouth Belvedere 4 dr Sedan


New User

Posts: 4

To all needing a master cylinder to pedal rod summit racing had an adjustable one for sell.
Top of the page Bottom of the page
Stroller
Posted 2019-03-29 12:09 PM (#580068 - in reply to #569819)
Subject: Re: Parting 1960 Plymouth Belvedere 4 dr Sedan


Extreme Veteran

Posts: 377
100100100252525
pm sent
Top of the page Bottom of the page
jboymechanic
Posted 2019-05-29 12:08 AM (#582641 - in reply to #569819)
Subject: Re: Parting 1960 Plymouth Belvedere 4 dr Sedan



Expert

Posts: 2206
2000100100
Location: Muskego, WI
Been a while, what's left on this car? Have a solid gas tank?

Edited by jboymechanic 2019-05-29 12:09 AM
Top of the page Bottom of the page
aaronsinthegarage
Posted 2019-09-21 6:13 PM (#587823 - in reply to #569819)
Subject: RE: Parting 1960 Plymouth Belvedere 4 dr Sedan


Regular

Posts: 86
252525
Location: Norfolk, VA
looking for front drivers door latch. Do you still have the car?
Top of the page Bottom of the page
aaronsinthegarage
Posted 2020-07-08 8:24 AM (#600594 - in reply to #569819)
Subject: RE: Parting 1960 Plymouth Belvedere 4 dr Sedan


Regular

Posts: 86
252525
Location: Norfolk, VA
Hi, I'm looking for fan shroud.
Top of the page Bottom of the page
CustomRoyal
Posted 2020-07-11 11:40 PM (#600751 - in reply to #600594)
Subject: RE: Parting 1960 Plymouth Belvedere 4 dr Sedan


Extreme Veteran

Posts: 322
100100100
No fan shroud, no gas tank, but have drivers door latch
Top of the page Bottom of the page
Stroller
Posted 2020-10-02 5:00 PM (#603908 - in reply to #569819)
Subject: Re: Parting 1960 Plymouth Belvedere 4 dr Sedan


Extreme Veteran

Posts: 377
100100100252525
Will you cut repair panels off it? I need a section to repair the right rear out side drop down. Also the right front rounded around where the trunk seal goes and the skeleton for the same place of the trunk lid. Also is the car like a '60 Fury? I am need of the back up lenses and a turn signal lever.
Top of the page Bottom of the page
Billohio
Posted 2020-10-18 9:15 PM (#604608 - in reply to #569819)
Subject: Re: Parting 1960 Plymouth Belvedere 4 dr Sedan


Regular

Posts: 65
2525
Does the car have a heater box on it? Cover on the firewall?
Top of the page Bottom of the page
CustomRoyal
Posted 2020-10-24 7:59 AM (#604857 - in reply to #604608)
Subject: Re: Parting 1960 Plymouth Belvedere 4 dr Sedan


Extreme Veteran

Posts: 322
100100100
I used heater box already. 1/4 panels rotted. Not much good sheet metal. Turn signal arm snapped off.
Top of the page Bottom of the page
CustomRoyal
Posted 2020-10-24 8:00 AM (#604858 - in reply to #600594)
Subject: RE: Parting 1960 Plymouth Belvedere 4 dr Sedan


Extreme Veteran

Posts: 322
100100100
No shroud on this car. 6 cyl auto no ac. It is a belvedere

Edited by CustomRoyal 2020-10-24 8:04 AM
Top of the page Bottom of the page
Stroller
Posted 2020-10-30 3:24 PM (#605074 - in reply to #569819)
Subject: Re: Parting 1960 Plymouth Belvedere 4 dr Sedan


Extreme Veteran

Posts: 377
100100100252525
What are the chances of having both of the front top fender mounted turn signal indicators with good lenses?
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)