|
|
Expert
Posts: 1348
Location: Valley Forge, Pa. | My car has a homemade brake push rod. I bought kit to convert to hydroboost P.B.s. It has a threaded rod coming out if the hydroboost. Without measuring, I believe it may be an 11/32 fine thread. This kit was made for my 1960 Plymouth so I am guessing it is the correct threaded rod size? Anyway, I am looking for the nut and end piece that connects to the pedal. Also MAY looking for a cap for my P. steering if its not too much. They come up on ebay every once in a while and it is not an emergency need.
Thanks for any help,
Karl. |
|
|
|
Expert
Posts: 1348
Location: Valley Forge, Pa. | got the brake rod but still would like a P.S. cap.
thanks
Karl. |
|
|
|
Expert
Posts: 1348
Location: Valley Forge, Pa. | Still looking. No one has a P.S. cap that they can part with?
Thanks again,
Karl. |
|
|
|
Expert
Posts: 3887
Location: Northen Virginia | what type of Ps?
|
|
|
|
Expert
Posts: 1348
Location: Valley Forge, Pa. | it's an Eaton.
Thanks for at least asking,
Karl. |
|
|
|
Expert
Posts: 3887
Location: Northen Virginia | is the one with the nipples on the side or the internal locking mechanism. Just for future reference is always better post a picture. |
|
|
|
Expert 5K+
Posts: 6498
Location: Newark, Texas (Fort Worth) | Look like this:
https://www.ebay.com/itm/NOS-MOPAR-1958-9-POWER-STEERING-PUMP-CAP-MO... |
|
|
|
Expert 5K+
Posts: 6498
Location: Newark, Texas (Fort Worth) | https://www.ebay.com/itm/NOS-MOPAR-1960-1-CAR-POWER-STEERING-CAP/232... |
|
|
|
Expert 5K+
Posts: 6498
Location: Newark, Texas (Fort Worth) | https://www.ebay.com/itm/NOS-MOPAR-1960-64-CAR-61-68-TRUCK-POWER-STE...
028614&hash=item590a7ae1ce:g:WXMAAOSwvv5ZenoY:rk:42:pf:0
|
|
|
|
Expert
Posts: 1348
Location: Valley Forge, Pa. | Thanks all for your help, I found an NOS one for $20.
Later,
Karl. |
|
|