The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

What size is the crank nut on a Poly 318?
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
Dracula
Posted 2018-03-13 3:52 PM (#559821)
Subject: What size is the crank nut on a Poly 318?



Member

Posts: 8

Location: Huntsville, TX		What size is the crank nut on a Poly 318?
Top of the page Bottom of the page
56D500boy
Posted 2018-03-13 4:58 PM (#559825 - in reply to #559821)
Subject: RE: What size is the crank nut on a Poly 318?



Expert 5K+

Posts: 9894
500020002000500100100100252525
Location: Lower Mainland BC
Dracula - 2018-03-13 3:52 PM
What size is the crank nut on a Poly 318?


I would guess 1.25" at least that is what my 56 Dodge D500 has. I bought a 1/2" drive 1.25" deep socket and used a long breaker bar to turn the engine with the plugs out to adjust the solid lifters that that engine has.

For poly engines, 57Chizler suggested using this:

Top of the page Bottom of the page
Dracula
Posted 2018-03-13 11:37 PM (#559851 - in reply to #559821)
Subject: Re: What size is the crank nut on a Poly 318?



Member

Posts: 8

Location: Huntsville, TX		Thank you. That was immensely helpful; my motor still refuses to turn, but I'm hoping she frees up.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)