The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Choke tube insulation wrap
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
'55-3Hemi
Posted 2018-02-12 1:06 PM (#557962)
Subject: Choke tube insulation wrap



Regular

Posts: 75
252525
Location: VIrginia
Hi everyone! New to this site and not sure where to post this but came across a source for a hard to come by product that I would like to share with. I replaced my rusted out choke tube on my 1955 Dodge Custom Royal Lancer from a 1/4" scrap tube I had laying around. Used the old tube as a guide and bent the tube with an economy tube bender and then added the old flare fitting after cleaning.

Looked everywhere for the woven cover but could not anything that came close to the look of the factory asbestos woven cover. I came across Classic Tube in New York and spoke with Tim Slattery (Senior Sales Rep) 800.882.3711 who said he could possibly fix me up.

Told him what size tube (1/4") and what length (29"). in less than a week this is what was provided

Edited by '55-3Hemi 2018-02-12 2:06 PM




(IMG_2216.JPG)



(IMG_2217.JPG)



(IMG_2222.JPG)



Attachments
----------------
Attachments IMG_2216.JPG (77KB - 137 downloads)
Attachments IMG_2217.JPG (71KB - 129 downloads)
Attachments IMG_2222.JPG (84KB - 124 downloads)
Top of the page Bottom of the page
Gasmanscotty
Posted 2018-02-12 11:10 PM (#558010 - in reply to #557962)
Subject: RE: Choke tube insulation wrap



Regular

Posts: 68
2525
Location: Mitchell Nebraska
Thanks for the info,have been up against the same problem,will check them out.
Top of the page Bottom of the page
Leadfoot1000
Posted 2018-02-15 11:19 PM (#558183 - in reply to #557962)
Subject: RE: Choke tube insulation wrap



Veteran

Posts: 241
10010025
Location: Southern CA
Looks good, I need some too. I’ll check into it. I just need to determine the proper routing for my tubing, the current one doesn’t look original. Thanks For posting.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)