The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

'57 Desoto parts
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
NM Desoto
Posted 2017-11-11 9:42 PM (#552084)
Subject: '57 Desoto parts


Veteran

Posts: 145
10025
I am looking for the following for a '57 Desoto convertible. Left and right wind vent assemblies. Left and right rear quarter power window regulators and motors. The five chrome strips on the deck lid for an Adventures. Any leads appreciated.
Top of the page Bottom of the page
FINS!
Posted 2017-11-13 9:48 PM (#552195 - in reply to #552084)
Subject: RE: '57 Desoto parts


Elite Veteran

Posts: 943
50010010010010025
I don't think the vent assemblies are convertible specific? If they are not I have them.
Top of the page Bottom of the page
NM Desoto
Posted 2017-11-13 9:57 PM (#552197 - in reply to #552195)
Subject: RE: '57 Desoto parts


Veteran

Posts: 145
10025
PM sent.
Top of the page Bottom of the page
d500dodge59
Posted 2017-11-16 12:57 AM (#552351 - in reply to #552195)
Subject: RE: '57 Desoto parts


Veteran

Posts: 245
10010025
convert assemblys is diferent from hardtop frames the frontline on conv goes all the way to the top on conv on hardtop it stop an goes back in the top
Top of the page Bottom of the page
Powerflite
Posted 2017-11-16 4:12 PM (#552424 - in reply to #552084)
Subject: Re: '57 Desoto parts



Expert 5K+

Posts: 9650
5000200020005001002525
Location: So. Cal		I believe the convertible top vent frames are the same as '58 hardtop correct?
Top of the page Bottom of the page
NM Desoto
Posted 2017-11-16 6:29 PM (#552433 - in reply to #552424)
Subject: Re: '57 Desoto parts


Veteran

Posts: 145
10025
From what I have found, All of the '57 convertibles used the same vent frame except Imperials. The '57 hardtops were specific to hardtops. The '58 Hardtops (including 4dr hardtops ) were common to all except Imperials. The '58 convertibles show a common but different number than the hardtops. I have been told the only difference between the convertible and hardtop frames is cosmetic, that the castings are just slightly different enough to make them a different part number. Everything hardtop in '58 and '59 should also work on a '57 or '58 convertible. For my purposes, I would be very happy with a nice pair of frames to put on the car. My car won't be a 100 point car, just a nice driver.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)