The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Anybody know that the PS pump return hose gasket looks like?
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
56D500boy
Posted 2017-07-19 4:55 PM (#544426)
Subject: Anybody know that the PS pump return hose gasket looks like?



Expert 5K+

Posts: 9854
5000200020005001001001002525
Location: Lower Mainland BC
GASKET 19-58-20 = PN 1485 894 But I don't know what it looks like. Mine is leaking at the non-pressure return hose adapter (19-58-15) and I would like to have one in hand before I remove the hose (and adapter).



Edited by 56D500boy 2017-07-19 4:57 PM




(55-56PowerSteeringPumpDiagram.jpg)



Attachments
----------------
Attachments 55-56PowerSteeringPumpDiagram.jpg (114KB - 171 downloads)
Top of the page Bottom of the page
DepsilonD
Posted 2017-07-21 2:10 PM (#544542 - in reply to #544426)
Subject: Re: Anybody know that the PS pump return hose gasket looks like?



Elite Veteran

Posts: 792
500100100252525
Location: Buena Park, CA
Dave, went looking for my pump on the shelf and it has gone missing. Sorry.
Top of the page Bottom of the page
56D500boy
Posted 2017-07-21 2:19 PM (#544543 - in reply to #544542)
Subject: Re: Anybody know that the PS pump return hose gasket looks like?



Expert 5K+

Posts: 9854
5000200020005001001001002525
Location: Lower Mainland BC
DepsilonD - 2017-07-21 2:10 PM Dave, went looking for my pump on the shelf and it has gone missing. Sorry.


Thanks for trying.

Anybody else?
Top of the page Bottom of the page
hemidenis
Posted 2017-07-21 3:59 PM (#544550 - in reply to #544426)
Subject: Re: Anybody know that the PS pump return hose gasket looks like?



Expert

Posts: 3887
20001000500100100100252525
Location: Northen Virginia
the gasket it should be only a copper washer. Copper is an amazing material you can heat the old washer in an electric stove and the material fix itself enough to be re-used.
You can also use plumber's seal to put it on the thread before assembly and it will not leak..
Top of the page Bottom of the page
rebel
Posted 2017-07-22 10:28 AM (#544605 - in reply to #544550)
Subject: Re: Anybody know that the PS pump return hose gasket looks like?


Extreme Veteran

Posts: 309
100100100
Location: Western Colorado
The sealing washer is copper and is 3/4" ID x 1" OD and is .030 thick. Most good parts houses that have oil pan drain plug assortments and copper gaskets should be able to supply this washer. It won't hurt if the washer is a little thicker.
Bob



(56 Power steering return hose fitting seal 001.JPG)



(56 Power steering return hose fitting seal 002.JPG)



Attachments
----------------
Attachments 56 Power steering return hose fitting seal 001.JPG (66KB - 156 downloads)
Attachments 56 Power steering return hose fitting seal 002.JPG (58KB - 155 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2017-07-22 11:01 AM (#544607 - in reply to #544605)
Subject: Re: Anybody know that the PS pump return hose gasket looks like?



Expert 5K+

Posts: 9854
5000200020005001001001002525
Location: Lower Mainland BC
hemidenis - 2017-07-21 3:59 PM The gasket it should be only a copper washer. Copper is an amazing material you can heat the old washer in an electric stove and the material fix itself enough to be re-used.
You can also use plumber's seal to put it on the thread before assembly and it will not leak..


rebel - 2017-07-22 10:28 AM The sealing washer is copper and is 3/4" ID x 1" OD and is .030 thick. Most good parts houses that have oil pan drain plug assortments and copper gaskets should be able to supply this washer. It won't hurt if the washer is a little thicker. Bob


Thank you both, gentlemen. I will seek out said washer.

Top of the page Bottom of the page
57chizler
Posted 2017-07-22 2:27 PM (#544621 - in reply to #544550)
Subject: Re: Anybody know that the PS pump return hose gasket looks like?



Expert

Posts: 3768
200010005001001002525
Location: NorCal

I agree with Denis, copper washers never die. Just anneal it and reuse.

Have you tried simply tightening the fitting?
Top of the page Bottom of the page
56D500boy
Posted 2017-07-22 2:41 PM (#544622 - in reply to #544621)
Subject: Re: Anybody know that the PS pump return hose gasket looks like?



Expert 5K+

Posts: 9854
5000200020005001001001002525
Location: Lower Mainland BC
57chizler - 2017-07-22 2:27 PM
Have you tried simply tightening the fitting?


Oh gosh!! Thanks. Why didn't *I* think of that?



DUH.

It's tightened beyond belief and yet, it still leaks.

But thanks for the suggestion.

Edited by 56D500boy 2017-07-22 3:08 PM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)