The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1960 Plymouth Belvedere Rear Tire Width
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Brakes, Wheels and TiresMessage format
 
jboymechanic
Posted 2017-07-17 11:59 AM (#544270)
Subject: 1960 Plymouth Belvedere Rear Tire Width



Elite Veteran

Posts: 948
50010010010010025
Location: Muskego, WI
What is the widest tire anyone has in their 1960 full size Plymouth? I need tires and I want to fill up the wheel wells more to get the look I'm after with my car. I want to stick with about a 27" tall tire and my car's suspension and body are completely stock. I currently have 215/75R15s in the rear and they look so narrow. I'm hoping that I could go to a 255/65R15 or similar. Let me know what you're able to run without any rubbing. Thanks.
Top of the page Bottom of the page
Powerflite
Posted 2017-07-17 6:55 PM (#544291 - in reply to #544270)
Subject: RE: 1960 Plymouth Belvedere Rear Tire Width



Expert

Posts: 3090
20001000252525
Location: So. California
It is best to just measure it out and see. Keep in mind that the closest inside point is not the body or the frame. It is likely the springs. I have 275x60x15 tires with 8" rims that have 0 offset on the back of my '58 Dodge and they fit very well without any rubbing at all. I would expect a 255 tire to fit without issue on yours, but you just need to measure it out. As you get wider, the offset of your wheels becomes more and more important. It seems that Chrysler designed their wheel openings to be centered with 0 offset at least from '57-'58.



(LRCoronets.jpg)



Attachments
----------------
Attachments LRCoronets.jpg (248KB - 1 downloads)
Top of the page Bottom of the page
jboymechanic
Posted 2017-07-18 1:09 PM (#544334 - in reply to #544270)
Subject: Re: 1960 Plymouth Belvedere Rear Tire Width



Elite Veteran

Posts: 948
50010010010010025
Location: Muskego, WI
Thanks for the feedback. Love your Dodge, super Tuff looking, the exact kind of look I'm going for with my Plymouth. Do you have a build thread on that one?
Top of the page Bottom of the page
1960fury
Posted 2017-07-18 2:15 PM (#544339 - in reply to #544334)
Subject: Re: 1960 Plymouth Belvedere Rear Tire Width



Expert

Posts: 4600
20002000500100
Location: northern germany
60/61 plymouths/darts with 118" wb have the smallest rear wheel wells of all fl's i guess. on my car 225 is the max but the axle doesn't drop very far, due to a big anti sway bar.

Edited by 1960fury 2017-07-18 2:17 PM
Top of the page Bottom of the page
Powerflite
Posted 2017-07-18 2:18 PM (#544340 - in reply to #544334)
Subject: Re: 1960 Plymouth Belvedere Rear Tire Width



Expert

Posts: 3090
20001000252525
Location: So. California
jboymechanic - 2017-07-18 10:09 AM
Thanks for the feedback. Love your Dodge, super Tuff looking, the exact kind of look I'm going for with my Plymouth. Do you have a build thread on that one?


Thanks. I think your '60 Plymouth would look pretty good this way. My build thread is here:

http://forwardlook.net/forums/forums/thread-view.asp?tid=63016&star...

Some advice on measuring: I like to install a wheel with a known offset & width on the car and then measure from that to determine the distances that are available to increase the size. This is easier and gives me more accurate results than by trying to measure from the drum face. You can figure out your wheel's offset by measuring the total width and backspace, but it helps if you have something that you already know the size for sure.

Edited by Powerflite 2017-07-18 2:28 PM
Top of the page Bottom of the page
ttotired
Posted 2017-07-18 4:57 PM (#544353 - in reply to #544270)
Subject: Re: 1960 Plymouth Belvedere Rear Tire Width



Expert 5K+

Posts: 8040
50002000100025
Location: Perth Australia
On my phoenix, all I could fit was 225/15R70 and it was tight.

The problem wasn't rubbing, it was getting the wheel off past the brake drum and rear fender.

It was better on one side than the other, but I had to let the air out and unbolt the shock absorber to get the wheel off.





(dodge rear.jpg)



Attachments
----------------
Attachments dodge rear.jpg (115KB - 0 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2017-07-18 6:17 PM (#544357 - in reply to #544353)
Subject: Re: 1960 Plymouth Belvedere Rear Tire Width



Expert

Posts: 3090
20001000252525
Location: So. California
It's funny though, I had a devil of a time getting the stock wheels with bigger tires on or off my '56 Plymouth which also has a small wheel well area. However, I found that by using a wider wheel, it actually became easier to mount because there was more room to maneuver it around the brake drum. So with the wider wheel, I had no difficulty getting 235x60 tires on there, whereas, my originals were much skinnier.
Top of the page Bottom of the page
jboymechanic
Posted 2017-07-18 11:09 PM (#544376 - in reply to #544270)
Subject: Re: 1960 Plymouth Belvedere Rear Tire Width



Elite Veteran

Posts: 948
50010010010010025
Location: Muskego, WI
Tonight I mounted a spare "squad car" wheel I have, measures 15"x 7". Of the 7" width, 4.5" are behind the wheel mount surface so I believe that would make the wheel 1" positive offset. Believe it or not, I still had plenty of room toward the leaf spring but I will be limited by the inside of the rear quarter panel. From the outermost lip of the wheel, I had 2.25 inches. Actual wheel overall width is 8", tire would obviously be centered on wheel so a 10" wide tire would still give me a 1.25" gap between sidewall and inside of quarter panel.

I also have rear disc brakes, which are much more compact than the drum setup. I think, when I have a chance, I'll take in to a tire shop and see if they can fit some 255/65R15 tires (28" x 10") in there.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Search for anything on eBay!

(Delete all cookies set by this site)