The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

300 G restored 'Electrical Perfection'
Moderators: ronbo97

Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> For Sale - EBAY, CRAIGSLIST & OTHER FINDSMessage format
 
60 Imp
Posted 2017-04-11 5:03 AM (#537835)
Subject: 300 G restored 'Electrical Perfection'


2000100050025
Location: North Australia
This ebay sellers description is a doozy. Our own Greg gets a mention. Nice looking old car.
Steve.

http://www.ebay.com/itm/1961-Chrysler-300-Series-300G-/122426644272...

Edited by 60 Imp 2017-04-11 5:06 AM
Top of the page Bottom of the page
GregCon
Posted 2017-04-11 9:18 AM (#537843 - in reply to #537835)
Subject: Re: 300 G restored 'Electrical Perfection'



Expert

Posts: 2524
2000500
Location: Houston
Certainly a very windy description
Top of the page Bottom of the page
56D500boy
Posted 2017-04-11 9:38 AM (#537846 - in reply to #537835)
Subject: RE: 300 G restored 'Electrical Perfection'



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
Why use eBay to sell that "G"? Wouldn't a Barrett-Jackson or Mecum or ??? get a better price.

Spending $45K on the dash is stupidly insane in my opinion. More money than brains. (Again, my opinion)

Top of the page Bottom of the page
imopar380
Posted 2017-04-11 1:20 PM (#537859 - in reply to #537835)
Subject: Re: 300 G restored 'Electrical Perfection'



Expert 5K+

Posts: 7205
50002000100100
Location: Victoria, BC, on Vancouver Island, Canada
This has been going around on Ebay on and off for months. Spending the amount of money they say on the electrics ....... . crazy. They could have spent some money polishing up the aluminum console etc., which is pretty poor looking. The seats are also upholstered incorrectly, the pattern on them is for a 300-F not a 300-G
Top of the page Bottom of the page
56300B
Posted 2017-04-11 1:35 PM (#537860 - in reply to #537835)
Subject: Re: 300 G restored 'Electrical Perfection'



Extreme Veteran

Posts: 480
100100100100252525
Location: The Great Northwest
Very nice car and the electrical systems may be perfection but it would be nice if some of the interior paint, chrome, and stainless were a tad nicer, the brake pedal wasn't worn, and the left tail light housing wasn't broken. Some rear spring rust and a black gas tank don't really help. It may be nit picking but using the word 'perfection' invites very close scrutiny of the entire car. A seller might use eBay if it doesn't look as good in person at an auction. Still a very nice car that should do well.
Top of the page Bottom of the page
hemidenis
Posted 2017-04-11 2:42 PM (#537869 - in reply to #537835)
Subject: RE: 300 G restored 'Electrical Perfection'



Expert

Posts: 3887
20001000500100100100252525
Location: Northen Virginia

I didn't believe at all what you guys said so I went and check it out...

 

"I state with great conviction that within the next 10 years, pristine Chrysler 300G's like this example

with be selling for $500,000 and 300G Convertibles will approach the million dollar mark!"

 

"We spent over $50,000 dollars on this car making all the power windows, power seats, radio, power antenna, 

factory air-conditioning, horn, lights, accessories, wipers, brakes etc. work as they should. "

 

"QUESTION: How is it possible to spend more money restoring the dash and all of the electrical

switches and controls in this car than more than six times the amount it would have cost back

in 1961 to buy six brand new Chrysler 300G's? ( $45,000+)"

 

but I got tired of BS so here it is: 

 

The fastest production car in the world in 1961-143 MPH on the hard packed sands of Daytona Beach,FL.

 

Out of 1280 Hardtops made, Only 340 left-One of the very Best in the world!

 

Less than 10% have factory air-conditioning,13 month restoration just completed.....$103,000+ in Receipts

 

Exterior Color: Mardi Gras Red (Factory Code PP1.....71203)

 

Interior: Tan Leather

 

Engine: Original 413 CID V-8 with Ram Induction/Dual Carter 4bbl Carburetors (professionally Rebuilt)

 

Horsepower: Factory rated a a very conservative 375 Horsepower

 

Torque: 495 Ft. Lbs @ 2800 rpm's.

 

Rear Axle: 3:23 sure grip

 

Transmission: Three Speed Automatic Push Button Torqueflite (Professionally Rebuilt)

 

Mileage: Exempt , just a couple 1000 miles since engine & drive line were restored

 

Since the High dollar Cosmetic, mechanical and electrical restoration, less than 200 miles.

 

PAPERWORK: Included are from the Chrysler FCA Historical Services is a letter documenting the authenticity

 of this car and a copy of the Factory Build Record Certificate. Also lots of paperwork about the 1961 Chrysler 300G

 Letter cars from Chrysler FCA Historical Services and News Letter from the Chrysler 300 Letter Club International.

 

Click the link below this sentence to view of the Paperwork!

 

https://drive.google.com/open?id=0B_bnRd7yEcXuT0hOWklKMFJjZ0U

Also a Hemming's Classic Car Magazine featuring the 1961 Chrysler 300G Sport Coupe, an ad from 1961 on the 300G

showing the 300G "flying" along the Beach in Daytona, Florida where it set the flying mile record in the Fall of 1960

 and an ORIGINAL Chrysler 300G Service Bulletin from October 1, 1960 on the 1961 300G.

 

A calendar featuring this car.

 

Advertisements from 1961/1962 featuring a Mardi Gras red Chrysler 300G.

 

A black and white Polaroid photograph of the 1st owner of the incredible car with

her Daughter driving. Behind the 300G you can see a 1961 Ford Thunderbird convertible.

 

Serial Number: 8413160191

 

This car has its ORIGINAL VIN and DATA PLATE (TRIM PLATE

 

Please see the close up photos of the factory original vin tag and the Trim tag.

 

 

 

 

Plate on front door hinge post. (See Last Photo Of Vin Plate)

 

TRIM PLATE also referred to as DATA Plate

 

REGION #73= San Francisco

Dealer Code #: 09291= Reno, NV

Berrmann & Wilson, Inc.

 

Body Type: 842= 2 Door Hardtop

Color: WW1= Alaskan White

Trim: 883= Beige Leather

 

A/C: 1= Air Conditioning & includes Heater

Radio: 8= Golden Touch Tuner incl. Rear Speaker

Tinted Glass: 1= All Windows

Tires: 96= Bluestreak Nylon WSW 8.00 X 15 (5)

Axle Ratio: 2= 3.23

Power Equipment: 3= Power Front Seats

Defogger: 9 = Rear Window

Differential: 9 = Sure Grip

Vent System: 7 = Closed Crankcase

Instrument Panel: 1 = Safety Padded

 

Shipped Date: February 24th, 1961

 

 

Serial Number: 8413160191

 

Decoding the serial number.

 

 

Serial Numbers Started at  8413100001

 

 

 

VIN Description

Total Digits: 10

 

Digits 1: Make-8= Chrysler

 

Digits 2: Series & Body style-4= 300G Sport 2 Door Hard Top

 

Digits 3: Model year-1= 1961

 

Digits 4: Assembly plant-3= Jefferson Plant, Detroit, Michigan

 

Digits 5-10: Production number- 160191

 

Plate on front door hinge post. (See Photo Of Vin Plate)

 

 

MSRP of Base 1961 300G 2/Door Sport Hard Top: $5413.00

MSRP of Base Convertible: $5843.00

 

Optional Equipment Offered in 1961 for a 300G that came on this car

 

383 = Remote Control LH outside Mirror = $18

 

293 = Power Front Seats = $101.90 

 

 

441 = Solex Tinted Glass (all windows) = $43.10 

 

 306 = Acc Grp. Golden Touch Tune Radio W/rear Speaker / Heater/ Rear widow Defogger/ Power Antenna & Grp A= $302.55

 

313 = Air Conditioning. Ordered with Accessory Grp # 306 = $408.50 

 

617 = Permanent Antifreeze = $5.90 

 

379 = Sure Grip Differential = $51.70 

 

Paint Codes.............. Ditzler Combination 

BB-1 = Formal Black .................. 9000 

PP-1 = Mardi Gras Red ...................... 71203 

RR-1 = Cinnamon ....................... 71140 

WW-1 = Alaskan White ..................... 8218

 

Summary Of This Car

 

MSRP of Base 1961 300G 2/Door Sport Hard Top: $5413.00

 

Total MSRP of this car was: $6344.65

 

 

Additional Costs were Shipping and any dealer Prep, Undercoating, Sales Taxes, etc. 

 

The "out the door" price on this magnificent 300G was right at $7000.

 

The ONLY American made cars that was this expensive  would have been a Cadillac

 Eldorado Biarritz Convertible or Lincoln Continental 4 door convertible.

 

The 300G represented Chrysler’s last and most dramatically styled letter cars. Retaining the flamboyant fins 

of its predecessor and extensive brightwork, the 300G was a sight as it came hurtling down the road.

 Without a doubt one of the more lavishly appointed cars when it came to the interior, they were luxurious

 and exceptionally fast, aimed to the moneyed motoring enthusiasts of the early 1960s. 

The Wedge head V8 offered ample performance and ride control was excellent. 

They offered dramatic new styling, but at the same time, still remained clearly conceived and built on the

 foundations of 300C.

 

The 300G unquestionably represents one of the last great letter series cars. In the ensuing years the cars

 were shaped more by social concerns than by engineers and, as such, the 300G continues to be one of

 the most collectable cars of the 1960s. With its distinctive styling and driving manners, it will continue

 to appreciate in both value and enthusiasts’ esteem.

 

I state with great conviction that within the next 10 years, pristine Chrysler 300G's like this example

with be selling for $500,000 and 300G Convertibles will approach the million dollar mark!

 

Now to attempt to describe this 300G being offered on ebaymotors.com

 

So how nice is this 300G? In one word.....SPECTACULAR!

 

The paint is gorgeous....with a deep gloss that looks like you could almost stick your hand inside the finish.

 

This car shows no signs of ever having been rusty or in need of body repair. The doors, hood and trunk all fit fabulous.

 

The chrome, trim and pot metal are show quality. I could not find any pitting or discoloration of the chrome or trim.

 

 It really is gorgeous!

 

You can kneel down and look along either side of this work of mechanical art and there are no waves or ripples

 in the body panels.

 

The test of a really great restoration is not how the cars looks when 1st done...or how it looks just

1 or 2 years later....but how the car stands the test of time 5, 10, 15 or even 20 years later. 

 

The awards this car received were from 1996,1997,2000 which validates that the nut & bolt very

 expensive restoration was finished in 1996.

 

 This 300G is of the same quality of a 1968 Shelby GT350 Convertible we sold recently on Ebaymotors.com

 for $125,000.

 

It was restored in 1994. The 68 Shelby & this Chrysler 300G both look like they were restored

within the past year or two.

 

The interior is fabulous..... Gary Goers in Kalispiel, Montana.

 Gary is without a doubt the finest  fabricator of Chrysler 300  interiors in the world...

 

Gary has had several health issues recently and we all pray

Gary can make a complete recovery.

 

We spent over $50,000 dollars on this car making all the power windows, power seats, radio, power antenna, 

factory air-conditioning, horn, lights, accessories, wipers, brakes etc. work as they should. 

 

The electroluminescent dash....OMG...we most assuredly could have bought a nice collectable car for the money 

we spent on the dash...but it now looks and works better than new!

 

What exactly is Electroluminescent?

 

How do these gauges light without bulbs, filaments or gases?

 

The answer lies in ceramic engineering!

 

The gauges and pointers are composed of laminated layers

of material which glow when a high voltage alternating current

is applied. As a result, the pointers are a light source in themselves,

as are the gauges.

 

A typical gauge or pointer is composed of several layers:

 

     * A sheet of vitreous enameling steel forms the instrument back

 

     *  A layer of solid ceramic is applied to the steel sheet

 

     *  Another layer is added which has electroluminescent phosphor suspend in ceramic

 

     * A transparent, electrically conducting layer is then added 

 

     *  A finished layer of transparent glass coating is then sprayed on

 

When you think that all of this was created by engineers who worked for Chrysler

in 1960, one must marvel at the pure genius of the guys and gals who innovated a dash

that looked like "A Radioactive Wurlitzer illuminated Bubbler Jukebox on steriods" in your dash.

 

That is why we decided to make every light and every switch and every gauge 

 work exactly like the day you would have taken delivery of your 1961 Chrysler 300G in 1961.

 

What is the "Power Pack" ?

 

The gauges and pointers are powered by a power pack which converts the 12 volts D/C

to 220 volts AC at 250 cycles per second. The power pack is mounted on the cowl side

 panel underneath the instrument panel on a 1960 Chrysler 300F and a 1961 Chrysler

300G.

 

BONUS: Not only does our car have a new power pack but we were able to find a brand new

one in it's original 1961 MoPar box. 

 

QUESTION: How is it possible to spend more money restoring the dash and all of the electrical

switches and controls in this car than more than six times the amount it would have cost back

in 1961 to buy six brand new Chrysler 300G's? ( $45,000+)

 

ANSWER: It's easy.  All that is required is that like all of us with Garage Memories,

you are a perfectionist and possibly slightly O/C ....

 

YES, we readily admit we are obsessive/compulsive when it comes to our cars.

After 56+ years in this incredible hobby, we are very cognizant that there just is no shortcut 

when it comes to perfection...and this 300G deserved perfection.

 

Step number 1 to achieve electrical perfection on this 300G.

 

First we sought out a company that could make an EXACT show quality reproduction 

of the original wiring harness's and we found a lovely couple in Canada. 

We wholeheartedly recommend that you seek out the EXPERT services of Greg Leggat 

in Napanee, Ontario Canada. Thanks to the great guys & gals in the Chrysler

international 300 Club we found out about the amazing skills of Greg.

 

Greg custom made in the exact correct colors and gauge, wiring harness's from the engine to

the dash, from the dash to the controls and from the dash all the way back to the

trunk and tail lights. They did it in the time frame they promised and at the exact price quoted.

 

Were their services inexpensive?

 

Perfection and exacting attention to detail is never cheap, but they were fair and did an EXCELLENT

 job! Every single wire was the precise correct gauge had a small tag on it stating where it was to go.

 

What about the actual dash?

 

Step 2

 

For the restoration of the entire dash, the electroluminescent dome and every gauge and every

 control in the car we went to the acknowledged world experts, Jeff, Lyle and the wonderful team at JC Auto

in Lynnwood, Washington.

 

I honestly don't believe any company in the world knows more about these incredible

1960 and 1961 Chrysler 300 letter cars than Jeff and his team. They work on almost every

type of MoPar cars and over the last 6 months with many, many conversations I consider

JC Auto to be one of the most professional and honest company's I have encountered

in the vintage automobile industry.

 

Are they expensive? Of course....

If you want perfection and experience on working on these very specialized intricate cars

 since 1978, you shouldn't expect "bargain basement" pricing.

 

We are proud to have all the Chrysler 300 letter cars in our Garage Memories Collection...

1957 through 1961, both the convertibles and hardtops.

 

I am convinced that in less than 10 years, a 61 Chrysler 300G coupe in this condition

will command a price of $500,000 and a Convertible will approach $1,000,000.

 

How did we spend over $50,000 on just the dash and electrical functions?

 

Here is a partial list....and we have the receipts and paid invoices to document what we did.

 

Jeff was able to find a perfect used Electroluminescent dome and had it

restored to brand new condition....and I really do mean "BRAND NEW" condition.

 

We had the speedometer and odometer completely disassembled and restored.

 

We had our clock completely rebuilt and restored with a new quartz movement

 

We had our tachometer completely disassembled, restored  and rebuilt.

 

We had the Touch-tune pushbutton radio, disassembled, restored and rebuilt.

 

We had the front and rear speakers completely rebuilt to original specs.

 

We had the front & rear speaker switch rebuilt and restored.

 

We had the power antenna switch rebuilt and restored the entire power

antenna motor & mechanism and bought a new antenna & antenna cable

from the back all the way to the dash and the radio.

 

We had all of the Transmission Torque-flite buttons & mechanism completely

rebuilt and restored.

 

We had the headlamp switch restored and rebuilt.

 

We had the courtesy lamp switch rebuilt and restored

 

We had the map lamp switch rebuilt and restored

 

We had the dome lamp switch rebuilt and restored.

 

We had the turn signal switch rebuilt and restored as well as the

turn signal canceling switch.

 

We had the variable speed wiper switch rebuilt and restored.

 

We had all of the A/C, defroster and heater switches rebuilt and restored.

 

We had the Power seat switch rebuilt.

 

We had the entire horn mechanism and horn relays either replaced or rebuilt.

 

We got very lucky and were able to find both the 4 power window switch assembly

as well as the two rear mounted power window switch assembly brand new in

1961 MoPar original boxes. 

 

We also were fortunate and found a brand new original MoPar fuse block 

in it's original MoPar box. YIKES this stuff is EXPENSIVE!

 

Every gauge works AS NEW.

 

Every light works exactly as it would have worked on a brand new Chrysler 300G

back in 1961.

 

The radio sounds incredible. Not only did JC Auto

do an incredible job on all the electronics, but they rebuilt the front

and rear speakers to perfection...I doubt if the radio sounded this good in 1961.

 

The AC blows ice cold......Brrrrrrr!

 

The clock keeps exact time. (original clock restored with new quartz movement)

 

All the gauges are accurate...including the Gas gauge, Amp meter,Temp gauge, Quartz clock 

Oil pressure and every other gauge...if it required a sending unit to work....we bought new ones.

 

Whoever is lucky enough will absolutely marvel when they drive this car at

night and turn on the lights.....When I turned on the dash for the 1st time in this

car...pure car delight.....don't laugh...almost orgasmic..to think that Chrysler could build a

car so advanced in 1961 is truly amazing and a tribute to their genius engineers.

 

When we replaced the battery cables...we bought them from JC Auto...because we wanted the

exact cables that this car would have come with in 1961.

 

What about the steering wheel?

 

Step 3

 

Here again we went to a world renowned EXPERT,Bob Deneault with D & D Automobilia

 in Lincolntown, NC.. He said it would take 5-6 months.  Bob restored our steering wheel in

 just under 4 months. It is a very, very tedious process with almost 25 different stages to

 the final result. It truly is a work of art and is described as being opalescent

 

EXPENSIVE?...Hell yes!

 

$1650 but the final product is worth every cent. And like 

Greg in Canada and Jeff with JC Auto in Washington, Bob is one terrific guy.

 

We also want to thank Gil Cunningham, President of the Chrysler 300 letter club for all of

his assistance, the people at FCA (Chrysler/Fiat/Automobile) historical society who

 were able to get us all the factory documentation and build card on this car, and last 

but certainly not least thanks to Gary Goers in Kalispell, Montana who even though fighting

 through some pretty serious health issues, is unquestionable the best source 

in the world for everything related to Chrysler 300 letter cars.

 

I have only touched on some of the work that went into restoring this car....if your

seriously interested in owning this 300G, please give us a call at (954) 873-6495

and I'll share with you more of what went into this restoration.

 

The labor cost on removing all the switches, gauges, panelescent dome,electrical

motors and installing the new wiring harness exceeded $17,000 and took 7 months.

 

The job was finished by a real gentleman, a true professional and friend for more than 30 years, Steve Greenblatt

owner of International Sport Cars and restoration facility in Pembroke Park, Florida. Kudos to you Steve

money we spent with you was money well spent. Everyone at Garage Memories admires

your honesty and the professional work you and your team does! Thank you.

 

Call us at (954) 873-6495  and we will gladly give you the lowest possible "buy it now" price  

 

Step 4

 

The Paint

 

There were a couple of places on this car that had acquired small chips in the paint and were touched up.

We have a fantastic painter who matched the paint to perfection and we had the entire panels repainted and I would

 challenge anyone to look at this car and to try and detect where this work was done. Forty years of painting cars 

plus the use of a modern day computer that matches paint to perfection is a winning combination!

 

We are extremely fussy and are car lovers and collectors first and foremost. Before we even consider selling any car...

it first has to be nice enough to take it's place among all of our other cars in our museum.....Garage Memories.

 

Only then do we offer any car for sale!

 

Step 5...Making the car run, stop and drive like it did in 1961

 

Looking nice if a must...but so is they way it starts, idles, runs and drives. We made this car run and drive

 just as it looks...FANTASTIC!

 

We drained all the fuel from this car and added new fresh 93 Octane.

 

Hank removed the ORIGINAL Carter AFB carburetors and had each professionally rebuilt.

 

We had a fresh set of spark plugs installed and a new set of points and a condenser.

 

The radiator was drained and flushed and new anti-freeze installed. The Oil & Filter were changed and the chassis lubricated.

 

We installed a NEW factory correct ignition and ignition lock.

 

We completely rebuilt the brakes on this car. We had all the brake drums turned, had all the brake cylinders rebuilt 

and had all new correct brake shoes installed on the car ($2525)

 

I drove this car. It goes like Gangbusters! As we use to say back in the late 50's & early 60'S "This Ride HAULS A**!"

 

If you grew up in Texas...."THIS DOG CAN HUNT!"

 

With the new brakes you can stop it as well...but keep in mind this is a 4250 pound car Dry, (4600 lbs wet) and was

and is capable of 140MPH...so PLEASE drive careful & thoughtful. Please be very careful when you unleash this beast! 

 These cars were made to GO FAST....NOT TO STOP FAST!

 

Thanks to Hank who is part of the team at International Sport Cars and restoration, this is the best running Chrysler 300

letter car we have ever owned or even driven! Well done Hank!

 

 We were fortunate to have found loads of NEW IN THE ORIGINAL PARTS BOX 

some incredible 1961 Chrysler parts so we bought them all....they were installed in this car

 

All brand new factory original window switches (6) and much, much more including a new original fuse

 block & power supply. We also bought from Gary Goers new aluminum driver's side floor scuff plates.

 

 

REMEMBER THE "GOOD OL DAYS"

 

THEY LOOKED SOMETHING LIKE THIS....

Top of the page Bottom of the page
GregCon
Posted 2017-04-11 6:13 PM (#537893 - in reply to #537835)
Subject: Re: 300 G restored 'Electrical Perfection'



Expert

Posts: 2524
2000500
Location: Houston

At least part of the art of restoration is using your brains and skills, not just your wallet.
Top of the page Bottom of the page
hemidenis
Posted 2017-04-11 10:17 PM (#537912 - in reply to #537835)
Subject: Re: 300 G restored 'Electrical Perfection'



Expert

Posts: 3887
20001000500100100100252525
Location: Northen Virginia
Sold the car for 70K and he spent 103k he lost only 33K... Bad electrical investment obviously...
Top of the page Bottom of the page
CaprockClassics
Posted 2017-04-11 11:00 PM (#537920 - in reply to #537835)
Subject: Re: 300 G restored 'Electrical Perfection'



Elite Veteran

Posts: 618
500100
Location: Lubbock, TX
Reserve not met at $70k, didn't sell it. I'd bet a fair wager that the high bidders were shills... Having a "Private Bidding Listing" is almost ALWAYS a cover-up for shill bidding. I have sold cars on eBay for 10 yrs now and I've never even considered doing a Private Listing...
Top of the page Bottom of the page
Greg P.
Posted 2017-04-14 9:54 AM (#538107 - in reply to #537835)
Subject: RE: 300 G restored 'Electrical Perfection'



Elite Veteran

Posts: 769
5001001002525
Location: Oley, PA
It's a nice car I wouldn't mind owning, but not at that price. While the written description is wayyyyy over the top, I'd still rather see too much than too little. I do find it annoying when they have to write out the complete history of the letter-series Chryslers. I'm pretty sure that anyone who is going to bid that kind of money, know what these cars are all about. To me, useful information is about the history of the specific car being sold, the condition before and after the restoration and details of the work performed.

A few things that caught my interest:

Seller says: "We had all the brake drums turned, had all the brake cylinders rebuiltĀ 
and had all new correct brake shoes installed on the car ($2525)"

Seriously? Wow! They spent that much on those items? If that's true, it sure seems like they wayyyyyyy overpaid.

Also, seems like a lot of effort to change a white car into a red one. It appears that it was done by a previous owner and looks like it was done well. It's just worth noting that in the high-end collector market, that could drop the value to some degree.

One other thing I found interesting was that the brake pedal has wear on both ends, indicating it was owned by a 2-footed driver. Not a big deal, just a bit unusual. It does surprise me a little that they didn't replace the pad with a new one, considering the amount of effort that went into the rest of the car.




(48.jpg)



Attachments
----------------
Attachments 48.jpg (43KB - 70 downloads)
Top of the page Bottom of the page
FIN ME
Posted 2017-04-14 5:17 PM (#538120 - in reply to #538107)
Subject: RE: 300 G restored 'Electrical Perfection'



Expert

Posts: 2788
2000500100100252525
Location: USA - KY
Greg P. - 2017-04-14 9:54 AM
...One other thing I found interesting was that the brake pedal has wear on both ends, indicating it was owned by a 2-footed driver...


Dang, Eagle Eyes! You could work for CSI Oley!


Top of the page Bottom of the page
hemidenis
Posted 2017-04-14 6:33 PM (#538125 - in reply to #537835)
Subject: Re: 300 G restored 'Electrical Perfection'



Expert

Posts: 3887
20001000500100100100252525
Location: Northen Virginia
Like Greg said, the worn pedal is an indication of the care for rest and ton of BS..
Top of the page Bottom of the page
57burb
Posted 2017-04-14 10:54 PM (#538139 - in reply to #538120)
Subject: RE: 300 G restored 'Electrical Perfection'



Expert

Posts: 3966
200010005001001001001002525
Location: DFW, TX
......or two different previous owners with different driving styles.
Top of the page Bottom of the page
saforwardlook
Posted 2017-04-15 6:19 PM (#538171 - in reply to #537835)
Subject: Re: 300 G restored 'Electrical Perfection'


Member

Posts: 32
25
The listing mentions Gary Goer's work, but I am positive that Gary knows what a correct set of seat covers look like on a 300G - very unique and one year only. This interior doesn't even mimic a 300F properly since those had a basket weave insert in the center of the leather bucket seats. And for electrical perfection, I would have expected they could have installed the wiper blades so they parked properly at the base of the windshield. Long writeups patting themselves on their backs and stressing the use of the word "perfection" usually are seen as a warning sign to me.






Edited by saforwardlook 2017-04-15 6:25 PM
Top of the page Bottom of the page
56D500boy
Posted 2017-04-15 7:36 PM (#538175 - in reply to #538171)
Subject: Re: 300 G restored 'Electrical Perfection'



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
saforwardlook - 2017-04-15 6:19 PM The listing mentions Gary Goer's work, but I am positive that Gary knows what a correct set of seat covers look like on a 300G - very unique and one year only. This interior doesn't even mimic a 300F properly since those had a basket weave insert in the center of the leather bucket seats.

So like these:



Not these:





Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)