The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1957 Chrysler Windsor 4-door sedan
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> For Sale - VEHICLESMessage format
 
kenbiello
Posted 2017-02-01 4:56 PM (#532912)
Subject: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Seems to be all original, except for electronic ignition/alternator. Was thinking of parting her out, but it's complete enough for someone that wants a fairly large project. Typical rusted floors/trunk.
Most of the pieces you see missing I have in the garage.

Car runs MINT!

Located 1 hour south of Boston.

Entertaining offers. Thanks all!


ken

Edited by kenbiello 2017-02-01 9:50 PM




(IMG_0528.JPG)



(IMG_0530.JPG)



(IMG_0531.JPG)



(IMG_0533.JPG)



(IMG_0534.JPG)



(IMG_0535.JPG)



(IMG_0536.JPG)



(IMG_0537.JPG)



(IMG_0539.JPG)



(IMG_0541.JPG)



Attachments
----------------
Attachments IMG_0528.JPG (135KB - 277 downloads)
Attachments IMG_0530.JPG (133KB - 276 downloads)
Attachments IMG_0531.JPG (143KB - 285 downloads)
Attachments IMG_0533.JPG (141KB - 269 downloads)
Attachments IMG_0534.JPG (133KB - 269 downloads)
Attachments IMG_0535.JPG (136KB - 264 downloads)
Attachments IMG_0536.JPG (141KB - 274 downloads)
Attachments IMG_0537.JPG (124KB - 252 downloads)
Attachments IMG_0539.JPG (134KB - 275 downloads)
Attachments IMG_0541.JPG (128KB - 273 downloads)
Top of the page Bottom of the page
kenbiello
Posted 2017-02-01 5:05 PM (#532913 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Almost forgot.......
power steering
radio
antenna
hand brake warning signal
back-up lights
stainless steel wheel covers
two-tone finish
tinted glass
driver's outside mirror
Top of the page Bottom of the page
billy
Posted 2017-02-23 11:46 AM (#534577 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan



Extreme Veteran

Posts: 395
100100100252525
Location: upstate new york
How much you asking Ken?
Which motor is in there?
billy
Top of the page Bottom of the page
mstrug
Posted 2017-02-23 5:32 PM (#534591 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan



Expert 5K+

Posts: 6487
50001000100100100100252525
Location: Newark, Texas (Fort Worth)
Looks like it has a poly.
Top of the page Bottom of the page
kenbiello
Posted 2017-02-24 9:14 AM (#534623 - in reply to #534577)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
354 2 barrel
need 3500 for her
can send video of her running
Top of the page Bottom of the page
kenbiello
Posted 2017-02-27 7:51 PM (#534846 - in reply to #534577)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
or best offer
Top of the page Bottom of the page
firedome
Posted 2017-02-28 10:31 AM (#534877 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan



Expert

Posts: 3153
200010001002525
Location: NY & VT
How bad are the floors, trunk, under body braces, frame? the pics don't show much.
Do you have the headlight buckets and bezels &c?
Top of the page Bottom of the page
kenbiello
Posted 2017-02-28 11:01 AM (#534880 - in reply to #534877)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
floors and trunk are toast
frame is solid
I have nearly everything that is not shown in the pics
Top of the page Bottom of the page
kenbiello
Posted 2017-03-19 9:57 AM (#536193 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Good morning everyone,

Parts are starting to come off the car now. Please let me know if anyone needs some. Whole car can be had for $1800
Just found another reason to spend the money now...........kids braces! lol
Top of the page Bottom of the page
Powerflite
Posted 2017-03-19 10:57 AM (#536199 - in reply to #536193)
Subject: Re: 1957 Chrysler Windsor 4-door sedan



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
I am interested in:

rear license plate bezel
rear license plate mount
horn ring
shifter + buttons assembly
radiator (if good)
left front door handle and latch (If they are good)

I would also like some sheet metal, but shipping it seems impossible.

Edited by Powerflite 2017-03-19 11:02 AM
Top of the page Bottom of the page
mstrug
Posted 2017-03-19 11:22 AM (#536202 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan



Expert 5K+

Posts: 6487
50001000100100100100252525
Location: Newark, Texas (Fort Worth)
http://www.ebay.com/itm/1957-Chrysler-Windsor-/162437219258?hash=it...

double ad. No-no:

http://www.ebay.com/itm/1957-Chrysler-Windsor-4-door-sedan-for-part...

Edited by mstrug 2017-03-19 11:24 AM
Top of the page Bottom of the page
kenbiello
Posted 2017-03-19 11:36 AM (#536204 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Ut oh! What do you think we should do about that? lol
Top of the page Bottom of the page
kenbiello
Posted 2017-03-26 11:00 AM (#536687 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Parts are starting to go. Please PM me with your needs. I posted on Ebay as well. No price gouging, just fair and reasonable, with actual shipping charges. Nothing inflated. Why are people getting worked up about this?
Top of the page Bottom of the page
kenbiello
Posted 2017-04-15 4:47 PM (#538163 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Still have a ton of parts left. Please email me with your needs. Full drive train available, running. Lots of glass, interior parts.
Hood, deck lid, suspension, etc.
Top of the page Bottom of the page
kenbiello
Posted 2017-04-21 2:11 PM (#538524 - in reply to #532912)
Subject: RE: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Dash is out, great shape. Complete.
Anyone?



(IMG_1070-2.jpg)



Attachments
----------------
Attachments IMG_1070-2.jpg (203KB - 257 downloads)
Top of the page Bottom of the page
kenbiello
Posted 2017-04-21 4:55 PM (#538543 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Hub caps left, grill, full wiring harness, drive train, etc.
Top of the page Bottom of the page
kenbiello
Posted 2017-04-22 10:36 AM (#538581 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Sheet metal looks good, except for the floors/trunk area. Rear window still available. Frame appears straight and solid.
PM with your needs, she's helping a lot of people out!
Top of the page Bottom of the page
kenbiello
Posted 2017-04-23 9:27 AM (#538666 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
rear glass
Top of the page Bottom of the page
kenbiello
Posted 2017-04-23 9:35 AM (#538669 - in reply to #538666)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
rear glass



(pass-rear.jpg)



Attachments
----------------
Attachments pass-rear.jpg (123KB - 256 downloads)
Top of the page Bottom of the page
kenbiello
Posted 2017-04-23 9:40 AM (#538670 - in reply to #538669)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
drivers rear



(drivers-rear.jpg)



Attachments
----------------
Attachments drivers-rear.jpg (200KB - 241 downloads)
Top of the page Bottom of the page
kenbiello
Posted 2017-04-26 7:02 PM (#538956 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
354 poly 2-barrel and trans available. Runs mint! Pics/video available.
PM me me with your needs please
Trying to get the last bits off to Mopar people before she get's salvaged
Top of the page Bottom of the page
kenbiello
Posted 2017-04-26 9:45 PM (#538963 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
front fenders look great too
Top of the page Bottom of the page
kenbiello
Posted 2017-05-03 3:42 PM (#539390 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Taking offers on the rest before she gets crushed. Engine/trans/rear still there
Rear window with gasket, all intact
Doors, hood, deck lid, front suspension, etc. PM me with your needs
Top of the page Bottom of the page
Powerflite
Posted 2017-05-03 3:49 PM (#539392 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
Do you have any of the side trim for the 2-tone?
Top of the page Bottom of the page
kenbiello
Posted 2017-05-04 11:55 AM (#539442 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
I have all of it. PM me please
Top of the page Bottom of the page
kenbiello
Posted 2017-05-05 2:04 PM (#539507 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Have all the front and rear window stainless as well. Headlight trims, buckets, etc.
Ignition with key, steering column, complete dash, etc....
Top of the page Bottom of the page
kenbiello
Posted 2017-05-12 4:08 PM (#539928 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Engine is sold I believe, have trans and rear end/suspension still. Anyone?
Top of the page Bottom of the page
kenbiello
Posted 2017-05-14 10:18 PM (#540035 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Doors/rear window and gasket still available
Top of the page Bottom of the page
kenbiello
Posted 2017-05-17 9:07 PM (#540287 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Still have a PERFECT grill, single lamp headlight buckets and trim, suspension parts
Sheet metal is really nice, rear glass with gasket intact
window regulators, gauges, etc.
Top of the page Bottom of the page
kenbiello
Posted 2017-05-23 5:45 PM (#540751 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Hello forum members. Doors are still here. Misc sheet metal. Front&rear seats, etc. PM with your needs please.
Top of the page Bottom of the page
kenbiello
Posted 2017-05-25 11:41 AM (#540884 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Members.........all 4-doors still available. Rear glass. Entire dash/gauges/etc. Hood and deck lid. Seats (need upholstery)
drive train is great, 48k miles. Runs and yard drives. Trying to share before she gets crushed.
Top of the page Bottom of the page
Powerflite
Posted 2017-05-25 1:05 PM (#540891 - in reply to #540884)
Subject: Re: 1957 Chrysler Windsor 4-door sedan



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
Many people, myself included, shy away from purchasing these large parts because of the unknown shipping cost for such things. It would be good for you to find out how you can ship these things, like the doors and hoods, and get an estimate of approximately how much it would cost to ship them. If you were closer, I would have bought the whole car from you but the shipping makes it cost prohibitive.
Top of the page Bottom of the page
kenbiello
Posted 2017-05-25 10:12 PM (#540916 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
I'm told Greyhound Package Express is fairly inexpensive. And you can ship larger items
Top of the page Bottom of the page
kenbiello
Posted 2017-05-26 7:20 AM (#540934 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
I'll be working on getting these quotes this weekend hopefully
Top of the page Bottom of the page
oldefar
Posted 2017-06-07 3:20 PM (#541716 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Elite Veteran

Posts: 708
500100100
Location: Fredrikstad, Norway. (Europe)
All I can say about this ad is that it makes me sick. Still another beautyful forwardlook car being slaughtered. That's one of the reasons I'm not on here to often any more. I just can't bare it. No Wonder so many of these cars go to Sweden and to bad this one did not. Then it would have been easily restored by one of the true forwardlook enthusiasts there and continue the "life" these beautyful cars deserve. 4 door sedan you say? Well, to me there is no difference in the matter of saving between a 2 door hard-top and a 4 door sedan. And it most probabely would not be for another true enthusiast either. Americans being interested in conserving these cars ? Bullsh*t ! Shame on you !

Harsh Words ? So let it be. I couldn't care less of what you think about that.

oldefar

Edited by oldefar 2017-06-07 3:23 PM
Top of the page Bottom of the page
kenbiello
Posted 2017-06-20 12:48 PM (#542505 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Wow, opinions are like a**holes, everyone has one. Funny thing, you don't see Americans usually importing anything from Sweden now do you? Do you even have anything worth importing? LMAO. These parts are saving and resurrecting other Mopars that need the donor parts. It's not being crushed, dumbass. Perhaps you don't know the difference?
Top of the page Bottom of the page
kenbiello
Posted 2017-06-20 12:51 PM (#542506 - in reply to #540891)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Just so you know, shipping the deck lid from Mass to Ohio was only $149 by Greyhound
Fairly affordable do you think?
Top of the page Bottom of the page
Powerflite
Posted 2017-06-20 2:20 PM (#542516 - in reply to #541716)
Subject: Re: 1957 Chrysler Windsor 4-door sedan



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
oldefar - 2017-06-07 12:20 PM

All I can say about this ad is that it makes me sick. Still another beautyful forwardlook car being slaughtered. That's one of the reasons I'm not on here to often any more. I just can't bare it. No Wonder so many of these cars go to Sweden and to bad this one did not. Then it would have been easily restored by one of the true forwardlook enthusiasts there and continue the "life" these beautyful cars deserve. 4 door sedan you say? Well, to me there is no difference in the matter of saving between a 2 door hard-top and a 4 door sedan. And it most probabely would not be for another true enthusiast either. Americans being interested in conserving these cars ? Bullsh*t ! Shame on you !

Harsh Words ? So let it be. I couldn't care less of what you think about that.

oldefar


It's funny Einar, but I know a couple Swedish car nuts here in the states and they are even worse than the Americans in terms of what they are willing to save and what they want to part out. They generally wouldn't waste their time with a lowly 2dr Saratoga coupe or Firedome. They chase after the convertibles, Adventurers, & 300's much more than the Americans do. Do these few represent the whole of Sweden? I'm sure they don't, but pictures I see posted from Sweden only tends to confirm this trend. I am more likely to see a 4dr sedan built and loved by an American than I am from a Swede - at least on this forum. I have never been to Sweden so maybe there is more happening with 4dr sedans than I know, but from my perspective here, it doesn't look that way. There seems to be quite a collection of high end cars over there that get bought out because Americans are less likely to be willing to pay big dollars for them. Everyone builds what they want and this car was a good runner that was offered at a very reasonable cost. Why didn't you or another Swede buy it???? He was originally offering it for less than it would cost you to pick up a complete, running 354 spitfire. It was quite a deal, but still no one took the offer to build it. If you want to blame someone for that, you can only point your finger at yourself. Apparently, it really is only good for parts because that's what the free market dictated. Although that makes me sad to see too.
Top of the page Bottom of the page
kenbiello
Posted 2017-06-21 8:27 AM (#542567 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Indeed, the perception of "yeah, but it's a 4-door" is very much alive here, but, I also have a 1958 Saratoga, 4-dr hard top, all original, numbers matching, that I've owned for years. And a 1964 300K Letter Car, all original, with the 413 Ram Induction. The car I'm parting has helped many, many people already. In fact, the FIRST person that bought parts drove down to my house from Montreal, Canada. He has the EXACT same car, 4 doors and all, same two-tone blue. This car donated a front windshield, steering wheel, front and rear bumper, trim, rear arm rests, etc, to restore his car. And the list goes on for others that are more than happy to use these parts to help fix/restore theirs. The whole purpose of me putting the car on here was for other Mopar people to use what they needed. Where else would I have gone? My point exactly.
Top of the page Bottom of the page
oldefar
Posted 2017-06-23 4:42 PM (#542732 - in reply to #542505)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Elite Veteran

Posts: 708
500100100
Location: Fredrikstad, Norway. (Europe)
Well Ken, I had my say and wasn't going to make any more comments, but sh*t, let go.

Since you think my opinion is like an ashole, I mean. Since I'm not a Swede but a Norwegian and don't live in Sweden, I don't have the slightest idea of what the Americans import from Sweden. You dig ?

If I have anything worth importing ? Of course I don't know how often you have been on here, but you have 78 posts since you enrolled in 2014 and if you have been on here a little more often than you have posted, you would probabely have seen what kind of cars I have owned and what cars I still own today. And then you could have judged for yuorself if any of them was/is worth importing to the U.S. Since I have posted pics of some of these cars on here before' I don't care to take the time and effort to do it again just for you. But I can mention a few: 1966 IMPERIAL Crown convertible Coupe With a total Production of 514. A couple of 1962 Chrysler 300 Sport Series 2 door hard-tops and one convertible. I have owned 5 out of the 3092 1960 DeSoto Adventurer 2 door hard-tops ever produced and I still own 3 of them. One With swivel seats and most ptions you could get on those cars. I also have a 1957 Chrysler Saratoga 4 door sedan (yes, a 4 door sedan) that have belonged to the former Prime Minister of Norway, mr. Einar Gerhardsen.

Selling a car off as parts is good for the buyer of the parts, but not so good for saving a beautyful car. And that is my point.

And if you know how to read plain English, I wrote slaughter, not crush. And yes, I know the difference. Just as well as i know that whatever is left of the car will be crushed or disposed off in some way.

Dumbass ? Well, namecalling and personal attacs is just another reason I'm not on here very often anymore. And please keep in mind that calling other dumb is the best way to show your own lack of intellegence.

Not showing any personal or location info. about yourself, also don't show much respect from my point of view.

oldefar (also called old fart by some one here.
Top of the page Bottom of the page
kenbiello
Posted 2017-06-24 10:34 PM (#542811 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Thank you for your reply, old fart. My longevity on this forum, or lack thereof is irrelevant. You threw stones first. Your opinion, while I'm certain is important to you, is not to me. 706 posts vs 78 post. And that means what exactly? That you have more free time to lecture people about their abuses of Forward Look vehicles? Last time I checked, no one asked you what you thought about this particular car. As Powerflite said, you or another member could have easily reached out to save this Windsor, if it was that important to you. In it's entirety. Where were you when I first posted it? Or your "true enthusiasts"? I actually rescued this car from a salvage yard before THEY crushed it! Maybe it was my lack of intelligence that made me do that? Even though I didn't need any of it. So perhaps the next time you run your mouth, get your facts straight. Dumbass was quite mild to what you should have gotten for being rude. A foreigner telling an American what I should do with an American car? Really? And my personal info or location.......? The ad clearly states one (1) hour south of Boston. I'll give you one from your own playbook: "Harsh Words ? So let it be. I couldn't care less of what you think about that."
Top of the page Bottom of the page
kenbiello
Posted 2017-07-02 9:44 AM (#543352 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
OK, back to work. Drivetrain is here. All four doors still available. $50 per door, shipping is around $50. Full dash with all the gauges. Entire suspension, etc.
PM me with your needs. Trying to repurpose as much as possible. This car has helped many already. Thank you.
Top of the page Bottom of the page
kenbiello
Posted 2017-07-07 10:53 PM (#543740 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Evening group............lots being donated to other projects! Happy that this car has been a great source for all of you that have been able to fix/restore your vehicles.
Drive train still here. Engine/trans/rear end. Rear quarters, all the doors. Still have the entire dash and gauges. PM me with your needs. Thanks!
Top of the page Bottom of the page
kenbiello
Posted 2017-07-09 9:52 PM (#543861 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Well, engine might be spoken for. Trans and rear end still there.
Misc parts, suspension, torsion bars, control arms, etc. PM me please
Top of the page Bottom of the page
61_Imperial
Posted 2017-08-11 10:36 AM (#546002 - in reply to #543861)
Subject: Re: 1957 Chrysler Windsor 4-door sedan



Extreme Veteran

Posts: 480
100100100100252525
Location: Georgetown Texas
kenbiello - 2017-07-09 9:52 PM

Well, engine might be spoken for. Trans and rear end still there.
Misc parts, suspension, torsion bars, control arms, etc. PM me please



Hi Ken, PM sent
Top of the page Bottom of the page
kenbiello
Posted 2017-11-29 6:09 PM (#553394 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
Good rear glass and gasket still left. Roof sheet metal. Rear end, axle-to-axle
Top of the page Bottom of the page
billy
Posted 2018-02-21 11:57 AM (#558563 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan



Extreme Veteran

Posts: 395
100100100252525
Location: upstate new york
Ken do you still have parts for this car?
thanks,
billy
Top of the page Bottom of the page
kenbiello
Posted 2018-03-18 12:23 PM (#560108 - in reply to #532912)
Subject: Re: 1957 Chrysler Windsor 4-door sedan


Veteran

Posts: 121
100
I do. PM me
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)