The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

crank pulley removal
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
fireguyfire
Posted 2017-01-02 12:18 AM (#530211)
Subject: crank pulley removal


Veteran

Posts: 169
1002525
Location: Cochrane, Alberta		Can anyone give me some tips on removing the crank pulley on my flathead 6? I see there are 2 threaded holes in the face for a puller; Do I have to remove the large centre nut and then use the puller? If so, what size of socket do I need for the centre nut?
Top of the page Bottom of the page
ttotired
Posted 2017-01-02 4:30 PM (#530249 - in reply to #530211)
Subject: Re: crank pulley removal



Expert 5K+

Posts: 8443
50002000100010010010010025
Location: Perth Australia		I don't have a flat head, so this might be wrong, but yes, undo the nut

Best advice, read about it in the service manual. You do have one, don't you?

Top of the page Bottom of the page
fireguyfire
Posted 2017-01-02 5:21 PM (#530255 - in reply to #530211)
Subject: Re: crank pulley removal


Veteran

Posts: 169
1002525
Location: Cochrane, Alberta		Sure do; skips right over removing the crank pulley and gets into crank changing the seal in the timing chain cover, and measuring the stretch in the timing chain itself.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)