The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

354 Hemi Distributor wrench # C-3419
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
Reg Evans
Posted 2016-11-12 2:20 PM (#526042)
Subject: 354 Hemi Distributor wrench # C-3419



Regular

Posts: 51
2525
Location: Grass Valley,CA.		Anyone here have a photo of a wrench used to loosen the distributor hold down bolt. My Bro and I have tried for over an hour to get his dist wrench on to no avail. We can't really see the darn bolt without a mirror. HELP !!!!!!!!
Top of the page Bottom of the page
Reg Evans
Posted 2016-11-12 6:27 PM (#526061 - in reply to #526042)
Subject: Re: 354 Hemi Distributor wrench # C-3419



Regular

Posts: 51
2525
Location: Grass Valley,CA.		Never mind. I got my daughter to get up on the engine and she was able to get a small 1/2" open end on that bolt. Ah, to be young again.
Top of the page Bottom of the page
StillOutThere
Posted 2016-11-12 6:51 PM (#526063 - in reply to #526042)
Subject: Re: 354 Hemi Distributor wrench # C-3419



2000100010010025
Location: Under the X in Texas		<p>There is a long shaft, offset 1/2 " box end wrench available at most auto parts stores for the MANY brands of cars with distributors held in time by a half inch headed bolt. Its a very common tool.</p>

Edited by StillOutThere 2016-11-12 6:55 PM




(DizzyWrench.jpg)



Attachments
----------------
Attachments DizzyWrench.jpg (5KB - 95 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2016-11-12 8:36 PM (#526075 - in reply to #526063)
Subject: Re: 354 Hemi Distributor wrench # C-3419



Expert 5K+

Posts: 9900
500020002000500100100100100
Location: Lower Mainland BC
StillOutThere - 2016-11-12 6:51 PM

There is a long shaft, offset 1/2 " box end wrench available at most auto parts stores for the MANY brands of cars with distributors held in time by a half inch headed bolt. Its a very common tool.



I just Googled "distributor wrench" and got a bunch of options back:

https://www.google.ca/search?q=distributor+wrench&source=lnms&tbm=is...

(I might be in the market for one for my D500 315 hemi).

Dave F.
Top of the page Bottom of the page
Powerflite
Posted 2016-11-12 9:52 PM (#526080 - in reply to #526075)
Subject: Re: 354 Hemi Distributor wrench # C-3419



Expert 5K+

Posts: 9654
5000200020005001002525
Location: So. Cal		The 1/2" version shown by Wayne is what I use. It works well and makes the job easy.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)