|
|
Veteran
Posts: 152
 
| john
just on thinking of what im after again I will need a good set of bumpers ,new Yorker /Windsor /300 design with the car
so maybe if you the 2dr which is there with these on or separate
as well as a set of coupe drs ,
thanks g |
|
| |
|
Expert 5K+
Posts: 7825
  
Location: Williams California | STOCKHEMI - 2015-06-02 2:53 AM
john
just on thinking of what im after again I will need a good set of bumpers ,new Yorker /Windsor /300 design with the car
so maybe if you the 2dr which is there with these on or separate
as well as a set of coupe drs ,
thanks g
Hi Graeme,
Please check your e-mails, as I've sent additional info on the cars.
---John |
|
| |
|
Member
Posts: 22
| John,
Any chance you have the left and right front roof-rail stainless trim pieces for a '59 2 door Firedome Sportsman? I have the rearward stainless trim pieces and the gold "Hernando" heads.
Thanks,
Chris Bingham
Myrtle Creek, Oregon |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Hi Chris,
I checked on those parts but was not able to come up with any.
---John |
|
| |
|
Member
Posts: 21
Location: Vancouver Island | Hello from west coast Canada...I'm looking for both rear armrests for a 1961 Plymouth Fury 2 door hardtop. The mounting holes are approx. 5 1/2 inches center to center. Please let me know if you have these items.
Thank you.
Glenn |
|
| |
|
Member
Posts: 22
| Thanks much for checking, John.
|
|
| |
|
Veteran
Posts: 157
Location: bountiful, Utah | John,
I need the dual side chrome trim from the front doors back on my 1957 Sport Suburban. what have you got?
Thanks,
Scott in Utah |
|
| |
|
Member
Posts: 9
| i have a 60 chrysler windsor thats missing the piece/assembly that fits on the steering column midway that powers the horn. thanks john |
|
| |
|
Elite Veteran
Posts: 1141
Location: Blackpool, United Kingdom. | Hi John ,
looking for a Right front fender for long wheelbase Desoto, or just the front part to alter a Chrysler one,
thanks Paul. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | springsweptwing - 2015-07-20 9:27 AM
Hi John ,
looking for a Right front fender for long wheelbase Desoto, or just the front part to alter a Chrysler one,
thanks Paul.
Hi Paul,
I checked what I have here, the best fender I've got is solid, but has several dents up towards the front. If you'd like photos to help decide, please let me know.
---John |
|
| |
|
Member
Posts: 43
Location: temperance, MI | Hello John,
I have a 61 dart Seneca,
- I'm looking for the speaker grill on the front center of the dash.
- looking for the upper left chrome trim piece for the dash, it may be a push button delete? Kinda looks like an upside down eyebrow, but it'd be off a manual trans model car.
- also looking for the D O D G E letters for the trunk and hood for that car as well. Mine are in decent shape but looking for nicer ones
thank you-Joe
|
|
| |
|
Member
Posts: 21
Location: Vancouver Island | Hello again. 1961 Plymouth Fury 2 DR HT, looking for the clip (?) that the sun visors clip into. Thank you.
Glenn |
|
| |
|
Elite Veteran
Posts: 1141
Location: Blackpool, United Kingdom. | big m - 2015-07-21 12:08 AM
springsweptwing - 2015-07-20 9:27 AM
Hi John ,
looking for a Right front fender for long wheelbase Desoto, or just the front part to alter a Chrysler one,
thanks Paul.
Hi Paul,
I checked what I have here, the best fender I've got is solid, but has several dents up towards the front. If you'd like photos to help decide, please let me know.
---John
Hi John,
picture if you would please, and also a price plus shipping to FL34762
thanks Paul.
Edited by springsweptwing 2015-07-21 11:06 PM
|
|
| |
|
Member
Posts: 10
Location: Netherlands / Mesa,Az | Hi John
I am looking for a 57/58 Plymouth 3spd pushbutton selector unit , preferable with cables but that is not neccessary. I am also looking for a 1957 301cid crankshaft ?
Thanks |
|
| |
|
Member
Posts: 10
Location: Netherlands / Mesa,Az | I am looking for some more parts:
1630862 Bellhousing
1731579 adapter plate between engine and bell housing
Also voor a plymouth 301 engine
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Rik - 2015-07-29 2:11 AM
I am looking for some more parts:
1630862 Bellhousing
1731579 adapter plate between engine and bell housing
Also voor a plymouth 301 engine
I do have the adaptor plate and air-cooled bellhousing available if you still need them.
---John
|
|
| |
|
Expert
Posts: 2648
Location: Minor Hill, TN | Do you also cut body panels? I need a rear quarter for the drivers side for a '61 fury 2drht I was told I can also use 1 from a 4dr car also. |
|
| |
|
Expert
Posts: 2648
Location: Minor Hill, TN | Do you also cut body panels? I need a rear quarter for the drivers side for a '61 fury 2drht I was told I can also use 1 from a 4dr car also. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Hi Steph,
I'll get some pics of a quarter panel for you.
---John |
|
| |
|
Member
Posts: 21
Location: Vancouver Island | Sorry, I don't seem to have much luck getting a response here, but everyone else does :). So I'll copy and paste my request in case it was missed.
"Hello again. 1961 Plymouth Fury 2 DR HT, looking for the clip (?) that the sun visors clip into. Thank you.
Glenn"
Thanks again. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | 61Fury2drht - 2015-08-04 12:11 PM
Sorry, I don't seem to have much luck getting a response here, but everyone else does :). So I'll copy and paste my request in case it was missed.
"Hello again. 1961 Plymouth Fury 2 DR HT, looking for the clip (?) that the sun visors clip into. Thank you.
Glenn"
Thanks again.
Hi Glenn,
Sorry about not getting back to you sooner. I did check on the part you are looking for, but didn't have any luck. I appreciate your inquiry, regardless.
---John |
|
| |
|
Veteran
Posts: 189
Location: Melbourne/ Australia | Hi john just wondering if you deal with any right hand drive 57 Plymouth parts from Canada I heard they made some of these there ,I could be wrong thanks paul |
|
| |
|
Regular
Posts: 85
| I'm looking for passenger side visor on 56 custom royal convertible. 765-749-9512 if you have one feel free to call or txt please |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | MikeDIsIn - 2015-11-12 5:08 PM
I'm looking for passenger side visor on 56 custom royal convertible. 765-749-9512 if you have one feel free to call or txt please
The convertible visors are specific to that body style, and are, thusly tough to find. Is yours missing altogether, or broken where it possibly can be repaired? Please let me know.
---John |
|
| |
|
Elite Veteran
Posts: 836
Location: Layton, Utah | Hi John, I am looking for the bottom stainless strip on the tail gate of my 61 Newport wagon. I have the other two pieces already. Cory. crossram@qwestoffice.net I've even resorted to locating a longer piece of another car that looks similar and shortening it. |
|
| |
|
Regular
Posts: 85
| sorry took so long but I'm not good with this site yet, mine is missing altogether.
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Sorry, but I haven't got one to spare currently.
---John |
|
| |
|
Veteran
Posts: 161
Location: Pearland, Texas, McPherson, Kansas | Hey Big M,
Any intact Hayes-Bellows brake boosters in the lot? Also I'm after a trunk pan and gas tank for my 57 Chrysler. Any in stock for any of those cars?
Jacob |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | J97_Imperial - 2016-01-07 7:38 PM
Hey Big M,
Any intact Hayes-Bellows brake boosters in the lot? Also I'm after a trunk pan and gas tank for my 57 Chrysler. Any in stock for any of those cars?
Jacob
Hi Jacob, I've sent you a PM regarding these items.
---John |
|
| |
|
Regular
Posts: 90
Location: Banks, Oregon | Hey John! Do you happen to have a rear seat that would fit in my 57 Plymouth four door Hardtop? |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | NWFinFan - 2016-01-08 5:16 PM
Hey John! Do you happen to have a rear seat that would fit in my 57 Plymouth four door Hardtop?
Pretty sure I have both cushions for one, or do you need just one?
Please let me know, John |
|
| |
|
Regular
Posts: 90
Location: Banks, Oregon | Yeah, I need both the back frame and bottom frame. My car is missing both of them. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Looks like I have both the3 upper and lower cushions in good condition, they'll need to be reupholstered, naturally.
Figure $300 for both.
---John |
|
| |
|
Regular
Posts: 90
Location: Banks, Oregon | big m - 2016-01-12 1:53 PM
Looks like I have both the3 upper and lower cushions in good condition, they'll need to be reupholstered, naturally.
Figure $300 for both.
---John
That works for me John. I'm going to talk with our mutual friend Ken Creason about picking them up for me while he's down for the swap meet. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | NWFinFan - 2016-01-11 5:57 PM
big m - 2016-01-12 1:53 PM
Looks like I have both the3 upper and lower cushions in good condition, they'll need to be reupholstered, naturally.
Figure $300 for both.
---John
That works for me John. I'm going to talk with our mutual friend Ken Creason about picking them up for me while he's down for the swap meet.
Sounds good!!! |
|
| |
|
Expert
Posts: 3968
Location: DFW, TX | Hi John,
Any chance you have a driver quality passenger side front turn signal lens for a '57 Desoto? My bumper is the big-body one, not sure if a Firesweep lens is the same.
Thank you,
Danny
 (2791878470_1ba18d949c.jpg)
Attachments
----------------
 2791878470_1ba18d949c.jpg (152KB - 562 downloads)
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Hi Danny,
I have several for the driver side, but none for the other side.
---John |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | '59 Desoto sedan and '56 Chrysler wagon acquired recently for parts. |
|
| |
|
Member
Posts: 12
| I need the following:
straight rear bumper for 60-62 Imperial
trim above rear bumper left side for 61 Imperial--has the letters embossed in it
driver's side internal door handle for a 63 imperial
operative window motor for a front door-63 imperial
uncracked dashpad for a 61 or 62 imperial--I think the 63 is a tad different--need a 61 and think the 62 is the same
plastic trim part between doors (floor to bottom of window--covers that pilar) both sides for a 61 four door dodge sedan (phoenix)
61 imperial wheel cover--just one really just need the center hub eagle emblem
lol--63 imperial convertible interior
lol-62 imperial convertible interior--I do need both but doubt those are handy--seat frames for the 62 are a must/ coupe would work
operative turn signal with cancel switch for 61 imperial, 61 polara, 61 phoenix, 60 dodge d100 truck; need all
You have any of this stuff?
email is crownking62@yahoo.com
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | dstratton - 2016-03-04 2:50 PM
I need the following:
straight rear bumper for 60-62 Imperial
trim above rear bumper left side for 61 Imperial--has the letters embossed in it
driver's side internal door handle for a 63 imperial
operative window motor for a front door-63 imperial
uncracked dashpad for a 61 or 62 imperial--I think the 63 is a tad different--need a 61 and think the 62 is the same
plastic trim part between doors (floor to bottom of window--covers that pilar) both sides for a 61 four door dodge sedan (phoenix)
61 imperial wheel cover--just one really just need the center hub eagle emblem
lol--63 imperial convertible interior
lol-62 imperial convertible interior--I do need both but doubt those are handy--seat frames for the 62 are a must/ coupe would work
operative turn signal with cancel switch for 61 imperial, 61 polara, 61 phoenix, 60 dodge d100 truck; need all
You have any of this stuff?
email is crownking62@yahoo.com
I checked the cars I have, and it seems someone else needed most of the same parts, so I'm unable to assist you at this time.
---John |
|
| |
|
Elite Veteran
Posts: 1055
Location: PL / EU | Hi John,
I am looking for a few parts
for 1959 Plymouth:
- 4bbl air cleaner
- deck lid
may you have 59 fury 2dr ht parts car?
for 1956 Chrysler:
- chrome screws for interior windshield trim ( a few)
- chrome screws for sill plate (a few)
- handle crank washers (a few)
- antenna nut
- spitfire valve cover (1)
- steering wheel
I know that the horn rings are very expensive. I like the steering wheel without a ring. as in the pic.
May you have something like that?
thanks
Robert
 (Chrysler 1955.JPG)
Attachments
----------------
Chrysler 1955.JPG (79KB - 541 downloads)
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | PM sent, Robert. |
|
| |
|
Member
Posts: 44
| I am restoring a 57 Ply Belvedere. I would like to put a/c in. Do you have any a/c parts for this car?
Thanks
mlb5355@hotmail.com. |
|
| |
|
Member
Posts: 21
Location: Vancouver Island | I'm looking for two trim pieces, they are about 18 inches long, fit on the outside of the headlights on the front fender. They need to have no dents and all three little mounting tabs intact. Thanks. 1961 Plymouth Fury 2 dr ht
Glenn |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Mikeb - 2016-03-08 6:52 PM
I am restoring a 57 Ply Belvedere. I would like to put a/c in. Do you have any a/c parts for this car?
Thanks
mlb5355@hotmail.com.
I have some A/C parts, but not an entire set up, unfortunately.
---John |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | 61Fury2drht - 2016-03-15 10:32 AM
I'm looking for two trim pieces, they are about 18 inches long, fit on the outside of the headlights on the front fender. They need to have no dents and all three little mounting tabs intact. Thanks. 1961 Plymouth Fury 2 dr ht
Glenn
Hi Glenn,
I checked for these trim pieces, but do not have them currently.
---John |
|
| |
|
Member
Posts: 21
Location: Vancouver Island | Thanks for checking, John. |
|
| |
|
Member
Posts: 44
| Looking for 58 Plymouth 2 door hardtop driver side window vent/wing. The whole frame piece. With or without glass. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | I'll have a look to see what I have here.
---John |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | evrydahero - 2016-03-16 2:43 PM
Looking for 58 Plymouth 2 door hardtop driver side window vent/wing. The whole frame piece. With or without glass.
The best one I have is heavily pitted, but not cracked.
---John |
|
| |
Parting over 40 FL cars
