|
|
Expert 5K+
Posts: 7825
    
Location: Williams California | I'll see what I can come up with, Mike.
---John |
|
| |
|
Extreme Veteran
Posts: 468
Location: Cushing, Wisconsin | Need a p/s pump with pulley for 1957 Chrysler 354 poly double groove pulley.
 (IMAG0024_1.jpg)
Attachments
----------------
 IMAG0024_1.jpg (220KB - 588 downloads)
|
|
| |
|
Extreme Veteran
Posts: 502
Location: London, England | Hi John - sorry to chase, did you get my email? We're moving house soon and I'm trying to get the car done so I can reduce the number of boxes I have to carry! 
Ian |
|
| |
|
Regular
Posts: 51
| 1960 dodge dart drivers side fender? |
|
| |
|
Member
Posts: 36
Location: Austin, TX | Hi John,
I am looking for floors (front and rear) and a full trunk pan for a `57 Desoto Firedome convt...would you happen to have these?
-Clif |
|
| |
|
Expert 5K+
Posts: 6572
Location: Newark, Texas (Fort Worth) | Thanks Big M! It runs and goes into gear! Marc. Payment on the way soon! Marc.
Edited by mstrug 2014-06-12 12:52 PM
 (1957BelvedereFrom Big M.3.JPG)
 (1957BelvedereFrom Big M.2.JPG)
 (1957BelvedereFrom Big M.4.JPG)
 (1957BelvedereFrom Big M.1.JPG)
Attachments
----------------
1957BelvedereFrom Big M.3.JPG (125KB - 635 downloads)
1957BelvedereFrom Big M.2.JPG (126KB - 557 downloads)
1957BelvedereFrom Big M.4.JPG (126KB - 588 downloads)
1957BelvedereFrom Big M.1.JPG (126KB - 589 downloads)
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Thanks, Marc!! |
|
| |
|
Veteran
Posts: 254
Location: Austria, Vienna | John,
I am looking for top ornament on fenders for 58 desoto.
Kind regards
Max |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | parat11 - 2014-07-12 10:02 PM
John,
I am looking for top ornament on fenders for 58 desoto.
Kind regards
Max
Hi Max,
I checked, but do not have any currently. I did just buy a '58 spring special Fireflite parts car, but won't have it at the yard for a couple months.
---John |
|
| |
|
Extreme Veteran
Posts: 502
Location: London, England | Hi John,
I need the 4 screws/bolts that attach the instrument pod onto the dash - 57 Plymouth. I've stupidly lost mine somewhere!
Ian |
|
| |
|
Extreme Veteran
Posts: 345
Location: Wisconsin | John,
PM sent. |
|
| |
|
Member
Posts: 15
Location: Modesto, CA | I need the flitesweep emblem off the trunk of the 60 imps ( if they have them ).
Also, the eyebrow emblems above the headlights.
Thanks. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Hi Chris,
I don't have the little brow emblems, but I do have a fliyesweep center medallion with good chrome. The plastic center is crazed from the sun, however. Figure $60 plus postage.
Please let me know if you are interested, John
|
|
| |
|
Veteran
Posts: 238
Location: Dallas,Ga. | Hey, John. It's been a while since I last did business with you, but I am looking for the rear window stainless trim for my '58 Firesweep four door sedan. I also need a parking brake handle, and the driver's side ashtray. Oh, and I need a driver quality uppermost taillight lens for the car as well. Can you please help? I am in Dallas, Ga. --------Zach |
|
| |
|
Regular
Posts: 90
Location: Banks, Oregon | John, I sent you a PM about a set of wind window assemblies for my 57 Plymouth four door hardtop. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | I'll check on them, and let you know shortly.
---John |
|
| |
|
Expert
Posts: 2600
Location: Upplands Väsby, Sweden | Hi John!
We come to your place yard at Sartuday 18/10 (before lunch) and stays over at Williams at Motell
Have just emailed (to bigmauto@colusanet.com) a wish list of parts that we are looking for, you are able to watch if you have it before we come.
This time maybe we can take more than a beer together?
Is there anything you want from Sweden?
|
|
| |
|
Veteran
Posts: 152
| hi have you any 57/8 Chrysler resrtoration projects
or if not any 392 parts or doors for 2dr car
thanks graeme |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | STOCKHEMI - 2014-12-12 4:08 AM
hi have you any 57/8 Chrysler resrtoration projects
or if not any 392 parts or doors for 2dr car
thanks graeme
Pretty sure I have some 2-doo HT doors, I also have a solid '57 Chrysler sedan, 4-door hardtop, 2-door hardtop '58 Windsor Dartline, and a solid '58 Windsor 2-door hardtop currently.
---John |
|
| |
|
Expert
Posts: 1526
Location: Lordstown, Ohio | Maybe I will try this route 59 firesweep like I asked in pm's |
|
| |
|
Elite Veteran
Posts: 1141
Location: Blackpool, United Kingdom. | Hi John,
looking for a rear spring for 58 Dodge LD3, one side has 1850270 stamped in and i need the other side 1850269? Or a matching pair of springs 1850271/2
Thanks Paul. |
|
| |
|
Veteran
Posts: 152
| john
thanks for your reply would it be possible to send some pictures over and prices
also do you have any 392 internals set of rods etc my mail stock505@btinternet.com
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | w.weiland - 2014-12-12 6:15 PM
Maybe I will try this route 59 firesweep like I asked in pm's
Hi Wayne,
Sorry, the only 2-door Firesweep I currently have is a rusty Texas car.
---John |
|
| |
|
Veteran
Posts: 197
Location: Mid Michigan | Hello John
I bought a 61 Plymouth Fury and am in need of some parts
Do you have any 61's around ?
Thanks Phil |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | coronetx2 - 2014-12-25 4:47 AM
Hello John
I bought a 61 Plymouth Fury and am in need of some parts
Do you have any 61's around ?
Thanks Phil
Hi Phil,
I only have three '61's currently.
What are you looking for?
---John |
|
| |
|
Veteran
Posts: 197
Location: Mid Michigan | Looking for both front parking light / turn signal assembles with lens
A good set of armrests for a two dr ht (blue ?) and any good Fury script for the front fenders?
also looking for gas pedal assemble( including pedal ) and linkages
basically from the pedal inside to the carburetor including fire wall mounting bracket for a v8
Thank Phil |
|
| |
|
Member
Posts: 20
Location: North Carolina | Hello John,
I could use crank pulley and water pump pulley off a 361 with power steering. We have a 60 plymouth fury convertible with the long ram set up, but we are running '61 style exhaust manifolds with an alternator. |
|
| |
|
Member
Posts: 41
Location: Cognac , S-W of France | Hello John
Still looking for a '58 Ply backup plate ...
Regards
Edited by Metalshop16 2015-01-15 4:31 AM
|
|
| |
|
Regular
Posts: 83
| I'm looking for the rear sheet metal for a 1961 Chrysler Newport-I need everything from the fins back. |
|
| |
|
Regular
Posts: 83
| I mean behind the fins on back. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | MrIncredible - 2015-01-23 1:20 AM
I mean behind the fins on back.
I'll check when I get back from Turlock, and let you know.
---John |
|
| |
|
Regular
Posts: 83
| Thanks, I appreciate it.
|
|
| |
|
Expert
Posts: 1532
Location: ZH, Switzerland | Do you have a cdpd drive shaft 1856 931? |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | di_ch_NY56 - 2015-02-27 2:42 PM
Do you have a cdpd drive shaft 1856 931?
I'll check for you, Dieter.
---John |
|
| |
|
Expert
Posts: 1532
Location: ZH, Switzerland | big m - 2015-02-27 2:10 AM di_ch_NY56 - 2015-02-27 2:42 PM Do you have a cdpd drive shaft 1856 931? I'll check for you, Dieter. ---John Thank you very much. I appreciate your help so much. Thank you. |
|
| |
|
Elite Veteran
Posts: 1141
Location: Blackpool, United Kingdom. | springsweptwing - 2014-12-13 3:06 AM
Hi John,
looking for a rear spring for 58 Dodge LD3, one side has 1850270 stamped in and i need the other side 1850269? Or a matching pair of springs 1850271/2
Thanks Paul.
Hi John,
any luck on rear leaf springs?
Thanks Paul |
|
| |
|
New User
Posts: 3
| Hello, I didn't read all 16 pages, but do you have any parts still left for a 1959 Chrysler lebaron? More specifically, a heater core.
Than you!
Ben |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | '59 Lebaron - 2015-03-23 2:55 PM
Hello, I didn't read all 16 pages, but do you have any parts still left for a 1959 Chrysler lebaron? More specifically, a heater core.
Than you!
Ben
Hi Ben,
I do have a good heater core if you are still needing one.
---John |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | springsweptwing - 2015-03-19 8:38 PM
springsweptwing - 2014-12-13 3:06 AM
Hi John,
looking for a rear spring for 58 Dodge LD3, one side has 1850270 stamped in and i need the other side 1850269? Or a matching pair of springs 1850271/2
Thanks Paul.
Hi John,
any luck on rear leaf springs?
Thanks Paul
Hi Paul,
I checked Hollander's and it shows all '58 and '59 Dodge passenger cars to use the same springs. I do have the stock springs.
---John |
|
| |
|
Regular
Posts: 89
Location: Hastings Mn | I am needing a left rear door power window motor and regulator for a 61 New Yorker 4dr hardtop. Any chance you have one? |
|
| |
|
Elite Veteran
Posts: 836
Location: Layton, Utah | Hi John/Big-M, I am looking for an air cleaner for a 61-61 Chrysler. Also the very bottom stainless on the tailgate of a 61 Newport wagon. Thanks, Cory (crossram@qwestoffice.net) thanks, Cory Jenkins
61 |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Hi Cory,
I have a complete air cleaner, although it has been fitted with a breather nipple for early California PCV systems. I did not have the molding for the wagon, though.
---John |
|
| |
|
Member
Posts: 26
Location: Staten Island, New York | I'm looking for front fenders and a RR door for a 60 Dart Pioneer sedan. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | I'll check to see what I have and let you know.
---John |
|
| |
|
Member
Posts: 43
| Do you have a push bar/Grill guard for a 60-61 Plymouth fury? |
|
| |
|
Veteran
Posts: 152
| hi john
I would like to know what you are wanting for your 2dr 57 Chryslers you have
and also could you give me price on a pair of 57 /8 coupe doors and floor sections for the complete rear
thanks g |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | I currently do not have any '57 2-door HT's for sale whole, but I do have a '58 Windsor, and '58 Spring special, as well as a running '57 sedan, and a 4-door HT.
 ('57-8 Chryslers 002.JPG)
 ('57-8 Chryslers 003.JPG)
 ('57-8 Chryslers 004.JPG)
 ('57-8 Chryslers 005.JPG)
 ('57-8 Chryslers 006.JPG)
 ('57-8 Chryslers 007.JPG)
 ('57-8 Chryslers 008.JPG)
 ('57-8 Chryslers 009.JPG)
 ('57-8 Chryslers 010.JPG)
 ('57-8 Chryslers 011.JPG)
Attachments
----------------
'57-8 Chryslers 002.JPG (125KB - 534 downloads)
'57-8 Chryslers 003.JPG (125KB - 589 downloads)
'57-8 Chryslers 004.JPG (126KB - 567 downloads)
'57-8 Chryslers 005.JPG (126KB - 546 downloads)
'57-8 Chryslers 006.JPG (125KB - 541 downloads)
'57-8 Chryslers 007.JPG (126KB - 569 downloads)
'57-8 Chryslers 008.JPG (126KB - 528 downloads)
'57-8 Chryslers 009.JPG (126KB - 565 downloads)
'57-8 Chryslers 010.JPG (126KB - 508 downloads)
'57-8 Chryslers 011.JPG (125KB - 594 downloads)
|
|
| |
|
Veteran
Posts: 152
| john
thanks for getting back I see you have a 300 57 ? or is it a clone what is the parts missing or repair needed
im intresred in a 2dr complete on the body and must have good chrome and doors
but I would like to ship with the car floor repair sections
if you could give me a price on the Saratoga 2dr
and the 300 and floor sections |
|
| |
|
Veteran
Posts: 152
| john
can you send any information on prices etc
stockhemi@outlook.com
thanks |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | STOCKHEMI - 2015-06-01 2:05 PM
john
thanks for getting back I see you have a 300 57 ? or is it a clone what is the parts missing or repair needed
im intresred in a 2dr complete on the body and must have good chrome and doors
but I would like to ship with the car floor repair sections
if you could give me a price on the Saratoga 2dr
and the 300 and floor sections
It's actually a real '59 300 E. I'll get back to you shortly with prices and details.
---John |
|
| |
Parting over 40 FL cars
